About this item
- The Part Number(OE Number): 0280150718
- Fuel injector enables fast start up in cold environments; , and no modification needed.
- Fitment: for Ford F-150 4.6L 2001-2002 5.4L 2001-2003; for Ford Excursion 5.4L 2001-2005; for Ford for Mustang 4.6L 2002-2004; for Ford Expedition 4.6L 5.4L 2001-2002; for Ford E-150 5.4L 2003; for Ford E-150 Club Wagon 5.4L 2003; for Ford E-150 Econoline 4.6L 5.4L 2001-2002; for Ford E-150 Econoline Club Wagon 4.6L 5.4L 2001-2002; for Ford E-250 Econoline 5.4L 2001-2002; for Ford E-350 Econoline Club Wagon 5.4L 2001-2002; for Ford E-350 Super Duty 5.4L 2001-2003
- Product Included: 1 x Fuel Injector; Material: Metal and Plastic; Pin Number: 2; Voltage: DC 12V; Orifice Type: 4 Holes Disc
- Notice: This is a non-OEM product, accessory only! Please make sure that the OE number and make/model/year/trim are the same as your OEM product before buying!
Description:
- The fuel injector exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.
Specification:
- O-Rings Product Included: Yes, preinstalled
- Orifice Type: 4 Holes Disc
- Material: Metal, Plastic
- Voltage: DC 12V
- Pin Number: 2
- OE Number: 0280150718
- Size: 77x34mm / 3.03″x1.34″(L*W)
Note:
- This installation should be done by an experienced mechanic who has access to a factory manual and all required tools!
- This is a non-OEM product, accessory only!
Fitment:
- for Ford F-150 4.6L 2001-2002
- for Ford F-150 5.4L 2001-2003
- for Ford Excursion 5.4L 2001-2005
- for Ford for Mustang 4.6L 2002-2004
- for Ford Expedition 4.6L 5.4L 2001-2002
- for Ford E-150 5.4L 2003
- for Ford E-150 Club Wagon 5.4L 2003
- for Ford E-150 Econoline 4.6L 5.4L 2001-2002
- for Ford E-150 Econoline Club Wagon 4.6L 5.4L 2001-2002
- for Ford E-250 Econoline 5.4L 2001-2002
- for Ford E-350 Econoline Club Wagon 5.4L 2001-2002
- for Ford E-350 Super Duty 5.4L 2001-2003
Product Included:
- 1 x Fuel Injector
Installation:
- Step 1. Make sure the engine is cool down. Disconnect the battery.
- Step 2. Remove the bolts and brackets from the fuel rail.
- Step 3. Disconnect the plug on each injector.
- Step 4. Lift the fuel rail and remove the injector from the fuel rail.
- Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
- Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
- Step 7. Double check for fuel leaks before and after starting the engine.
Reviews
There are no reviews yet.