About this item
- The Replacement Part Number(OE Number): 16600-JA00A, 16600-JA01A, 16600-JA10A, 16600-JK20A 16600-9DE0B
- Fitment: Fit for Infiniti G35 V6-3498cc 35L F/I Vin VQ35HR 2007-2008, for Nissan Altima Base, Hybrid, S|4 Cyl 2.5L 2007-2013,for Nissan Rogue S, SL, SV|4 Cyl 2.5L 2008-2013
- Fuel-Efficient Injector: High efficient fuel sprays and High Impedance Coil enable fast start up in the cold environments, low fuel consumption, and better performance.
- Professional installation is highly recommended: Fuel injectors directly affect the air/fuel ratio for the engine and new fuel injectors do require a new or updated tune. We also suggest that you check the other component of the engine before installation.
- Package Included: 1 x Fuel Injector; Material: Metal and Plastic; Pin Number: 2; Voltage: DC 12V; Orifice Type: 12 Holes Disc, Flow Rate: Same as
Description:
- Direct replacement of your old injector and no modification needed.
- The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.
Specification:
- O-Rings Included: Yes, preinstalled
- Orifice Type: 12 Holes Disc
- Flow Rate: Same as
- Color: Green
- Material: Metal, Plastic
- Voltage: DC 12V
- Pin Number: 2
- Manufacture Part Number: 16600-JA00A, 16600-JA01A ,16600-JA10A, 16600-JK20A
- Size: 65x34x19mm / 2.56″x1.34″x0.75″(L*W*H)
Note:
- This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools!
- Please check the fitment section of this listing before you bid.
- Please kindly check again your engine volume!
- This is a non-OEM product, accessory only!
Fitment:
- for Infiniti G35 V6-3498cc 3.5L F/I Vin VQ35HR 2007-2008
- for Nissan Altima Base, Hybrid, S|4 Cyl 2.5L 2007-2013
- for Nissan Rogue S, SL, SV|4 Cyl 2.5L 2008-2013
Package Included:
- 1 x Fuel Injector
Installation:
- Step 1. Make sure the engine is cool down. Disconnect the battery.
- Step 2. Remove the bolts and brackets from the fuel rail.
- Step 3. Disconnect the plug on each injector.
- Step 4. Lift the fuel rail and remove the injector from the fuel rail.
- Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
- Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
- Step 7. Double check for fuel leaks before and after starting the engine.
Reviews
There are no reviews yet.