About this item
- The Part Number(OE Number): 195500-2040,JF07-13-250,JF0713250
- Fitment: for Mazda 323 1.6L 1993-1994, for Mazda MX-3 1.6L 1992-1993
- Fuel injector enables fast start up in cold environments; , and no modification needed.
- Product Included: 1 x Fuel Injector; Material: Metal and Plastic; Pin Number: 2; Voltage: DC 12V; Orifice Type: 12 Holes Disc
- Flow Rate at 43.5psi/3 bar, 17.7Lb/hr, 133.7G/min,186cc/min. Notice: This is a non-OEM product, accessory only! Please make sure that the OE number and make/model/year/trim are the same as your OEM product before buying!
Description:
- Direct replacement of your old injector and no modification needed.
- Made of metal and plastic material which is durable and can use for a long time.
- The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.
Specification:
- O-Rings Product Included: Yes, preinstalled
- Orifice Type: 1 Hole Disc
- Material: Metal, Plastic
- Color: Gray, Silver Tone
- Voltage: DC 12V
- OE Number: 195500-2040,JF07-13-250,JF0713250
- Pin Number: 2
- Dimension: 77x35x26mm / 3.03″x1.38″x1.02″(L*W*H)
- Flow Rate at 43.5psi/3 bar, 17.7Lb/hr, 133.7G/min,186cc/min
Note:
- Please check the fitment section of this listing before you bid.
- This installation should be done by an experienced mechanic who has access to a factory manual and all required tools!
- Please kindly check again your engine volume!
- This is a non-OEM product, accessory only!
Fitment:
- for Mazda 323 1.6L 1993-1994
- for Mazda MX-3 1.6L 1992-1993
Product Included:
- 1 x Fuel Injector
Installation:
- Step 1. Make sure the engine is cool down. Disconnect the battery.
- Step 2. Remove the bolts and brackets from the fuel rail.
- Step 3. Disconnect the plug on each injector.
- Step 4. Lift the fuel rail and remove the injector from the fuel rail.
- Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
- Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
- Step 7. Double check for fuel leaks before and after starting the engine.
Reviews
There are no reviews yet.