About this item
- Fitment: for Buick Regal 3.8L V6 1990-1995, For Oldsmobile Toronado 3.8L V6 1991-1992, For Oldsmobile 98 3.8L V6 1991-1994, for Buick Riviera 3.8L V6 1991-1993, for Buick Park Avenue 3.8L V6 1991-1994, for Pontiac Trans Sport 3.8L V6 1992, for Pontiac Bonneville 3.8L V6 1992, For Oldsmobile Silhouette 3.8L V6 1992, for Buick LeSabre 3.8L V6 1992
- OE Number:0280150960/0280156378/24501509
- Product Characteristics: High-efficient fuel sprays and High Impedance Coils enable fast start-up in cold environments, low fuel consumption, and better performance.
- Feature: Durable effective rubber O-Ring that can seal fuel vapors in and keep them from leaking.
- Installation: Professional installation is highly recommended: Fuel injectors directly affect the air/fuel ratio for the engine and new fuel injectors do require a new or updated tune. We also suggest that you check the other component of the engine before installation.
Fitment:
- for Buick Regal 3.8L V6 1990-1995
- for Oldsmobile Toronado 3.8L V6 1991-1992
- for Oldsmobile 98 3.8L V6 1991-1994
- for Buick Riviera 3.8L V6 1991-1993
- for Buick Park Avenue 3.8L V6 1991-1994
- for Pontiac Trans Sport 3.8L V6 1992
- for Pontiac Bonneville 3.8L V6 1992
- for Oldsmobile Silhouette 3.8L V6 1992
- for Buick LeSabre 3.8L V6 1992
OE Number:
- 0280150960/0280156378/24501509
Product Characteristics:
- Direct replacement of your old injector and no modification needed.
- Durable effective O-Ring that can seal fuel vapors in and keep them from leaking.
- High efficient fuel sprays and High Impedance Coil for good performance.
- The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.
- Fuel injectors directly affect the air/fuel ratio for the engine and new fuel injectors do require a new or updated tune. Professional installation is highly recommended.
Installation:
- Step 1. Make sure the engine is cool down. Disconnect the battery.
- Step 2. Remove the bolts and brackets from the fuel rail.
- Step 3. Disconnect the plug on each injector.
- Step 4. Lift the fuel rail and remove the injector from the fuel rail.
- Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
- Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
- Step 7. Double check for fuel leaks before and after starting the engine.
Note:
- Please make sure your model&39;s ENGINE and TRIM are as described before purchasing!
Reviews
There are no reviews yet.