About this item
- The Part Number(OE Number): 23250-28070, 23209-28070
- Fitment: for Toyota RAV4 1AZ-FSE 2.0L 2AZ-FSE 2.4L D4 Engine; for Toyota Avensis 1AZ-FSE 2.0L 2AZ-FSE 2.4L D4 Engine; for Toyota Noah 2002-2004 2.0L 2.4L; for Toyota Voxy 2002-2004 2.0L 2.4L; for Toyota Gaia 2001-2004 2.0L 2.4L; for Toyota Nadia 2001-2003 2.0L 2.4L; for Toyota Vista 2001-2003 2.0L 2.4L; for Toyota Opa 2001-2005 2.0L 2.4L; for Toyota Caldina 2003-2007 2.0L 2.4L; for Toyota Allion Premio 2001-2007 2.0L 2.4L
- Fuel injector enables fast start up in cold environments; , and no modification needed.
- Product Included: 1 x Fuel Injector; Material: Metal and Plastic; Pin Number: 2; Voltage: DC 12V; Orifice Type: 1 Hole Disc
- Notice: This is a non-OEM product, accessory only! Please make sure that the OE number and make/model/year/trim are the same as your OEM product before buying!
Description:
- The high impedance fuel injector exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.
Specification:
- O-Rings Product Included: Yes, preinstalled
- Orifice Type: 1 Hole Disc
- Material: Metal, Plastic
- Color: Silver Tone, Green
- Voltage: DC 12V
- OE Number: 23250-28070, 23209-28070
- Pin Number: 2
- Size: 88.5x47x25mm / 3.48″x1.85″x0.98″(L*W*H)
Note:
- This installation should be done by an experienced mechanic who has access to a factory manual and all required tools!
- This is a non-OEM product, accessory only!
Fitment:
- for Toyota RAV4 1AZ-FSE 2.0L 2AZ-FSE 2.4L D4 Engine
- for Toyota Avensis 1AZ-FSE 2.0L 2AZ-FSE 2.4L D4 Engine
- for Toyota Noah 2002-2004 2.0L 2.4L
- for Toyota Voxy 2002-2004 2.0L 2.4L
- for Toyota Gaia 2001-2004 2.0L 2.4L
- for Toyota Nadia 2001-2003 2.0L 2.4L
- for Toyota Vista 2001-2003 2.0L 2.4L
- for Toyota Opa 2001-2005 2.0L 2.4L
- for Toyota Caldina 2003-2007 2.0L 2.4L
- for Toyota Allion Premio 2001-2007 2.0L 2.4L
Product Included:
- 1 x Fuel Injector
Installation:
- Step 1. Make sure the engine is cool down. Disconnect the battery.
- Step 2. Remove the bolts and brackets from the fuel rail.
- Step 3. Disconnect the plug on each injector.
- Step 4. Lift the fuel rail and remove the injector from the fuel rail.
- Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
- Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
- Step 7. Double check for fuel leaks before and after starting the engine.
Reviews
There are no reviews yet.