23250-31030 23209-31030 Fuel Injector for Lexus GS460 2009 Base Sedan 4-Door 4.6L 4608CC V8 GAS DOHC Naturally Aspirated

About this item

• The Replacement Part Number(OE Number): 23250-31030, 23209-31030
• Fitment: for Lexus GS460 2009 Base Sedan 4-Door 4.6L 4608CC V8 GAS DOHC Naturally Aspirated
• Fuel-Efficient Injector: High efficient fuel sprays and High Impedance Coil enable fast start up in the cold environments, low fuel consumption, and better performance.
• Professional installation is highly recommended: Fuel injectors directly affect the air/fuel ratio for the engine and new fuel injectors do require a new or updated tune. We also suggest that you check the other component of the engine before installation.
• Package Included: 1 x Fuel Injector; Material: Metal and Plastic; Pin Number: 2; Voltage: DC 12V; Orifice Type: 2 Holes Disc, Flow Rate: Same as

Description:

• Direct replacement of your old injector and no modification needed.
• Made of metal and plastic material which is durable and can use for a long time.
• The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of the OEM fuel injector.

Specification:

• O-Rings Included: Yes, preinstalled
• Orifice Type: 2 Holes Disc
• Color: Silver Tone, Purple
• Material: Metal, Plastic
• Flow Rate:  Same as
• Manufacture Part Number: 23250-31030, 23209-31030
• Voltage: DC 12V
• Pin Number: 2
• Size: 88x43x19mm / 3.46″x1.69″x0.75″(L*W*H) 

Note:

• This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools!
• Please check the fitment section of this listing before you bid.
• Please kindly check again your engine volume!
• This is a non-OEM product, accessory only!

Fitment:

• for Lexus GS460 2009 Base Sedan 4-Door 4.6L 4608CC V8 GAS DOHC Naturally Aspirated

Package Included:

• 1 x Fuel Injector

Installation:

• Step 1. Make sure the engine is cool down. Disconnect the battery.
• Step 2. Remove the bolts and brackets from the fuel rail.
• Step 3. Disconnect the plug on each injector.
• Step 4. Lift the fuel rail and remove the injector from the fuel rail.
• Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
• Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
• Step 7. Double check for fuel leaks before and after starting the engine.