About this item
- The Part Number(OE Number): 23710-26011
- Fitment: for Lexus IS MK II [2005-2013] Saloon 220d Saloon 2231ccm 177HP 130KW (Diesel) 2005-2012, for Toyota Auris _E15_ [2006-2012] Hatchback 2.2 D Hatchback 2231ccm 177HP 130KW (Diesel) 2006 -2012, for Toyota AVENSIS 2003-2013, for Toyota AVENSIS VERSO 2001-2006, for Toyota COROLLA 2000-2013, for Toyota COROLLA VERSO 2004-2013, for Toyota RAV4 2005-2013, for Toyota VERSO 2009-2016, for IS II 200D / 220D 2005-2013
- Fuel injector enables fast start up in cold environments; , and no modification needed.
- Product Included: 1 x Fuel Injector; Material: Metal and Plastic; Pin Number: 2; Voltage: DC 12V
- Notice: This is a non-OEM product, accessory only! Please make sure that the OE number and make/model/year/trim are the same as your OEM product before buying!
Description:
- Direct replacement of your old injector and no modification needed.
- The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.
Specification:
- O-Rings Product Included: Yes, preinstalled
- Orifice Type: 1 Hole Disc
- Material: Metal, Plastic
- Manufacture Part Number: 23710-26011
- Voltage: DC 12V
- Pin Number: 2
Note:
- This installation should be done by an experienced mechanic who has access to a factory manual and all required tools!
- This is a non-OEM product, accessory only!
Fitment:
- for Lexus IS MK II [2005-2013] Saloon 220d Saloon 2231ccm 177HP 130KW (Diesel) 2005-2012
- for Toyota Auris _E15_ [2006-2012] Hatchback 2.2 D Hatchback 2231ccm 177HP 130KW (Diesel) 2006 -2012
- for Toyota AVENSIS 2003-2013
- for Toyota AVENSIS VERSO 2001-2006
- for Toyota COROLLA 2000-2013
- for Toyota COROLLA VERSO 2004-2013
- for Toyota RAV4 2005-2013
- for Toyota VERSO 2009-2016
- for IS II 200D / 220D 2005-2013
Product Included:
- 1 x Fuel Injector
Installation:
- Step 1. Make sure the engine is cool down. Disconnect the battery.
- Step 2. Remove the bolts and brackets from the fuel rail.
- Step 3. Disconnect the plug on each injector.
- Step 4. Lift the fuel rail and remove the injector from the fuel rail.
- Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
- Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
- Step 7. Double check for fuel leaks before and after starting the engine.
Reviews
There are no reviews yet.