About this item
- The Part Number(OE Number): CDH210, 842-12223, INP-771, FJ411, 0280155723,MD319791
- Fitment: for Yamaha Outboard 3.0L; for Chevrolet Tracker 2.0L 1999-2003; for Chrysler Sebring 3.0L 2001-2005; for Dodge Stratus 3.0L 2001-2005; for Mitsubishi Eclipse 3.0L 2001-2005; for Mitsubishi Galant 3.0L 1999-2003; for Mitsubishi Mirage 1.8L 1997-2002; for Suzuki Vitara 2.0L 1999-2003.
- Fuel injector enables fast start up in cold environments; direct replacement of your old or broken injector, and no modification needed.
- Product Included: 4 x Fuel Injector; Material: Metal and Plastic; Pin Number: 2; Voltage: DC 12V; Orifice Type: 4 Holes Disc
- Flow Rate at 43.5psi/3 bar, 21.9Lb/hr, 165.4G/min, 230cc/min. Notice: This is a non-OEM product, accessory only! Please make sure that the OE number and make/model/year/trim are the same as your OEM product before buying!
Description:
- Direct replacement of your old injector and no modification needed.
- Made of metal and plastic material which is durable.
Specification:
- O-Rings Product Included: Yes, preinstalled
- Orifice Type: 4 Holes Disc
- Material: Metal, Plastic
- Color: Red
- Voltage: DC 12V
- OE Number: CDH210, 842-12223, INP-771, FJ411, 0280155723,MD319791
- Flow Rate at 43.5psi/3 bar, 21.9Lb/hr, 165.4G/min, 230cc/min
- Pin Number: 2
- Dimension: 6.2×3.5x2cm / 2.44″x1.38″x0.79″(L*W*H)
Note:
- Please check the fitment section of this listing before you bid.
- This installation should be done by an experienced mechanic who has access to a factory manual and all required tools!
- Please kindly check again your engine volume!
- This is a non-OEM product, accessory only!
Fitment:
for Yamaha Outboard 3.0L
for Chevrolet Tracker 2.0L 1999-2003
for Chrysler Sebring 3.0L 2001-2005
for Dodge Stratus 3.0L 2001-2005
for Mitsubishi Eclipse 3.0L 2001-2005
for Mitsubishi Galant 3.0L 1999-2003
for Mitsubishi Mirage 1.8L 1997-2002
Product Included:
- 4 x Fuel Injector
Installation:
- Step 1. Make sure the engine is cool down. Disconnect the battery.
- Step 2. Remove the bolts and brackets from the fuel rail.
- Step 3. Disconnect the plug on each injector.
- Step 4. Lift the fuel rail and remove the injector from the fuel rail.
- Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
- Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
- Step 7. Double check for fuel leaks before and after starting the engine.
Reviews
There are no reviews yet.