About this item
- The Part Number(OE Number): 0280155784
- Fitment: for Jeep Wrangler 4.0L 1999-2004, for Jeep Cherokee 4.0L 1999-2001, for Jeep Grand Cherokee 4.0L 1999-2004, for Dodge for Ram 2500 Van 4.0L 2000-2003, for Dodge for Ram 3500 Van 4.0L 2000-2003, for Dodge for Ram 1500 4.0L 2000-2001
- Fuel injector enables fast start up in cold environments; direct replacement of your old or broken injector, and no modification needed.
- Product Included: 6 x Fuel Injector; Material: Metal and Plastic; Pin Number: 2; Voltage: DC 12V; Orifice Type: 4 Holes Disc
- Notice: This is a non-OEM product, accessory only! Please make sure that the OE number and make/model/year/trim are the same as your OEM product before buying!
Description:
- Made of metal and plastic material which is durable and can use for a long time.
- The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.
Specification:
- O-Rings Product Included: Yes, preinstalled
- Orifice Type: 4 Holes Disc
- Material: Metal, Plastic
- Color: Black
- Voltage: DC 12V
- OE Number: 0280155784
- Pin Number: 2
- Dimension: 73x29x20mm / 2.87″x1.14″x0.79″(L*W*H)
Note:
- This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools!
- Please check the fitment section of this listing before you bid.
- Please kindly check again your engine volume!
- This is a non-OEM product, accessory only!
Fitment:
- for Jeep Wrangler 4.0L 1999-2004
- for Jeep Cherokee 4.0L 1999-2001
- for Jeep Grand Cherokee 4.0L 1999-2004
- for Dodge for Ram 2500 Van 4.0L 2000-2003
- for Dodge for Ram 3500 Van 4.0L 2000-2003
- for Dodge for Ram 1500 4.0L 2000-2001
Product Included:
- 6 x Fuel Injector
Installation:
- Step 1. Make sure the engine is cool down. Disconnect the battery.
- Step 2. Remove the bolts and brackets from the fuel rail.
- Step 3. Disconnect the plug on each injector.
- Step 4. Lift the fuel rail and remove the injector from the fuel rail.
- Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
- Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
- Step 7. Double check for fuel leaks before and after starting the engine.
Reviews
There are no reviews yet.