Camlock DN 25 (1”) Polypropylene Coupling Hose Pillar (25 mm) Type E MIL-C-27487 [2 Pieces]

Polypropylene DN 25 (1 inch) Camlock coupling adapter (male) with 25 mm hose pillar. This coupling is a Type E coupling (plug with hose barb end). The maximum operating pressure is 6 bar (87 psi). The coupling is suitable for temperatures between -10 to 80 °C (14 to 176 °F). It has an EPDM seal. The coupling adheres to the MIL-C-27487 standard.

The coupling requires two parts: the socket (female) and the plug or adapter (male part). To connect the Camlock coupling, insert the plug (adapter) into the socket and press the levers down. To disconnect, lift both levers and pull out the plug.

Pros:

• Full bore with minimal pressure loss
• Suitable for solids, since there are no internal valves
• The coupling adheres to the MIL-C-27487 standard

Specifications

Coupling size : 1 inch
Diameter, hose connector (mm) : 25
Material : Polypropylene (PP)
Seal material : EPDM
Shape : Adapter (male)
Nominal diameter (mm) : 25
Max temperature (°C) : 80
Min temperature (°C) : -10
Max pressure at 20 °C (bar) : 6