PowerScout 3 HD is a single-point meter that features increased measurement performance, industry-standard communications, and two form factors. Monitor a single three-phase load or network with other PowerScout HD meters to monitor several loads across your facility. This model is Cloud-enabled and includes a wall-mount enclosure that’s ready to be installed near your panel or switchgear.
Dent PS3HD-C-D-N-D Offers
Revenue-grade performance
With high speed continuous sampling, data updates rate of 1 Hz and ANSI C12.20-2015 Class 0.2 revenue grade accuracy (depending on CT), the PowerScout 3 HD is well-suited for accountability metering in commercial, retail, and industrial facilities including demand response and tenant submetering.
Line or USB powered
PowerScout 3 HD instruments are line-powered with an internal wide-range power supply, allowing line-to-line voltages from 90 to 600 V AC. For convenience, the PS3HD also includes a USB (Type C) connector which allows the meter to be powered from a host PC or laptop computer during configuration.
Industry-standard modbus or bacnet
The PowerScout 3 HD supports both Modbus and BACnet communications protocols. Communications interface can be accomplished through serial RS-485 or Ethernet using either Modbus RTU, BACnet MS/TP, Modbus TCP, or BACnet IP protocols.
Quick setup
The PowerScout 3 HD can be configured using one of two interfaces: PC Application ViewPoint HD or Web Browser. Configurations can be saved to a template for re-use. Use the on-board LCD and thumb wheel to verify setup.
Powerful troubleshooting
The PowerScout 3 HD meter includes DENT’s patented* PhaseChek™ circuitry for identifying mis-phased and backwards CTs. When used in conjunction with ViewPoint HD, advanced analytics are available including waveform visualization, vector polar plotting and harmonic distortion analysis. DENTCloud submetering data analytics platform provides secure, subscription-free, real-time access to your energy data anywhere in the world.
Features
- DENTCloud offers visibility into all your power consumption data points, flexible data visualization, seamless integration capabilities and self-managed API access offers the flexibility to connect to any endpoint
- 3-phase submeter monitors voltage, current, power, energy, and many other electrical parameters on single or three-phase systems
- Revenue grade: ANSI C12.20-2015 Class 0.2 certification
- Store up to 63 days of 15-minute kWh data
- Continuous sampling; no blind cycles
- Use with a full range of DENT Split Core or RōCoil™ Rogowski-style CTs, including several revenue-grade options
- 90 to 600V Phase-to-Phase power supply
- Display shows real-time information about the meter configuration and metered data
- Communicate using either BACnet or Modbus protocol
- User-configurable alarm with isolated output
- Data updates occur every 1.0 seconds
- Patented PhaseChek™ technology confirms proper CT orientation
- UL Listed, CE Mark, BTL Certification
Applications
- Tenant Submetering (shopping malls, apartments, office space, etc)
- Bi-Directional Metering (renewable energy applications, such as solar or wind)
- Real-time power monitoring in commercial, retail, and industrial environments
Dent PS3HD-C-D-N-D Specifications
| Service Type | Single-phase, three phase-four wire (WYE), three phase-three wire (Delta) |
| Power | From L1 Phase to L2 Phase. 90 to 600 V AC RMS CAT III 50/60 Hz, 500 mA AC maximum |
| AC Protection | 0.5 A internal fuse protection. 200 KA interrupt |
| Channels | Voltage: 80 to 346 V AC line-to-neutral, 600 V line-to-line, CAT III Current: 3 channels, 0.525 V AC maximum, 333 mV CTs, 0 to 4000+ A depending on CT |
| Maximum Current Input | 150% of current transducer rating (mV CTs) to maintain accuracy Measure up to 4000 A with RoCoil CTs |
| Measurement Type | True RMS using high-speed digital signal processing (DSP) |
| Line Frequency | 50/60 Hz |
| Sampling | Continuous 1.8 kHz (no blind cycles) |
| Parameter Update Rate | 1.0 second |
| Measurements | Volts, Amps, kW, kVAR, kVA, aPF, dPF, kW demand, kVA demand, Import (received) kWh, Export (delivered) kWh, Net kWh, Import (received) kVAh, Export (delivered) kVAh, Net kVAh, Import (received) kVARh, Export (delivered) kVARh, Net kVARh, THD, Theta, Frequency. All parameters for each phase and element total |
| Resolution | 32-bit floating point |
| Display | 2 x 16 character display with tri-color backlight |
| Hardware | RS-485 Serial and Ethernet |
| Maximum Communication Length | 3937 (1200 m) at 100 K bits/second or less |
| Communication Rate (Baud) | Modbus: 9600, 19200, 38400, 57600, 76800, 115200 baud BACnet: 9600, 19200, 38400, 76800 |
| Data Bits | 8 |
| Parity | None, Even, Odd |
| Stop Bit | 2, 1 |
| Supported Protocols | Modbus RTU, BACnet MS/TP, Modbus TCP or BACnet IP |
| Wire Connections | 12 to 28 AWG 600 V AC, voltage connection must be #14 AWG or larger and 600 V AC rated |
| Mounting | Wall mount enclosure |
| Operating Temperature | -4 to 140°F (-20 to 60°C) |
| Humidity | 5 to 95% non-condensing |
| Enclosure | ABS Plastic, 94-V0 flammability rating |
| Certifications | UL listed: Conforms to UL Std 61010-1, 3rd Edition & IEC 61010-2-030 1st Edition CE: LVD (EN61010-1), EMC (EN61326-1), RoHS 2 (EN50581) |
| Dimensions | 10.12 x 5.5 x 2.12″ (25.7 x 14 x 5.37 cm) |
| Weight | Approximately 22 oz (635 g) |
Reviews
There are no reviews yet.