Key Features
Made for Finish WorkThis 16 gauge angled finish nail is built for trim, casing, crown, chair rail, cabinets, and furniture work where you want solid holding power without stepping up to a heavier fastener. 20 Degree CollationThe 20 degree angled layout is designed for compatible angled finish nailers, which helps you get into tighter trim locations than a straight finish nail setup. Galvanized SteelGalvanized steel construction helps resist moisture and rust, which matters when the box may sit in a truck, shop, or jobsite trailer before you ever load the nails.
Overview
The DEWALT DCA16250 20-Degree Angled Finish Nail is a 16 gauge, 2-1/2 inch collated finish nail pack built for interior trim and finish carpentry. This is a finish nail designed for fastening moldings, casings, trim, cabinetry, furniture parts, and hardwood flooring details with a compatible angled finish nailer. Model Number: DCA16250.
What matters here is the combination of size and application. At 2-1/2 inches long, these nails give you the reach needed for common finish work where shorter fasteners can come up light, especially on thicker trim or layered material. The 16 gauge profile is a practical middle ground for pros who need stronger holding than lighter finish nails while still keeping the hole size reasonable for visible finish surfaces.
The 20 degree angled collation is not just a fitment detail. It determines what nailers this product works with and helps the tool access tighter spots around corners, inside cabinets, and along installed trim. If you run a compatible DEWALT cordless angled nailer, this nail format is the part that keeps your setup feeding correctly and working the way it should.
DEWALT also uses galvanized steel here, which adds rust and moisture resistance compared to plain steel fasteners. That does not turn this into an exterior nail, and the product is still specified for interior use only, but it does make sense for normal jobsite storage and interior environments where basic corrosion resistance is worth having.
A 2,500-count box means you are buying jobsite quantity, not a small refill pack. For trim crews, remodelers, flooring installers, and finish carpenters, that means fewer interruptions to reload stock and a better fit for regular daily use. For a serious DIY user doing a full room of casing, crown, or built-ins, the larger count is also more economical than burning through smaller boxes.
If you are matching fasteners to the work, this is the right kind of nail for window and door casings, trim and crown molding, chair rail, cabinet and furniture building, and similar finish applications. If you need a nail for exterior trim or a different nailer angle, this is not the one to force. But if your nailer takes 20 degree 16 gauge angled finish nails, this is a straightforward DEWALT consumable that covers a lot of everyday finish work.
Built for Interior Trim Jobs
This is the kind of fastener you buy when the work is visible and the hold still matters. The DCA16250 is aimed at finish applications where clean installation, consistent feeding, and enough length to bite through trim into backing all count.
- 16 gauge, 2-1/2 inch finish nails for trim, cabinets, furniture, and flooring details
- 20 degree angled collation for use with compatible angled finish nailers
- Galvanized steel construction with 2,500 nails per box
What’s in the Box
- (1) Box of DEWALT DCA16250 20-Degree Angled Finish Nails
- (2500) 16 gauge, 2-1/2 inch galvanized finish nails
Nailer sold separately.
Key Specifications
| Gauge | 16 gauge |
|---|---|
| Nail Length | 2-1/2 in |
| Collation Angle | 20° |
| Piece Count | 2500 |
| Material | Steel |
| Finish | Galvanized |
| Head Type | Finish |
| Weight | 5.3 lbs |
Compatibility
Nailer TypeDesigned for compatible 20 degree angled finish nailers. DEWALT NailersListed for use with DEWALT cordless angled nailers, including DC618KA, DC619KA, DC614KA, and DC615KA.
Built For
Finish Carpentry Trim Installation Window and Door Casings Crown Molding Chair Rail Cabinet and Furniture Building Hardwood Flooring Installation Interior Use
Pro Tip
Before you load these, double-check all three fit points on your nailer: 16 gauge, 20 degree, and 2-1/2 inch capacity. Finish nailers are picky about angle and collation, and getting that wrong is the fast way to create feed issues on trim work.
Warranty & Support
No manufacturer’s warranty.
Tool Nut’s Take
Tool Nut’s Take
DEWALT DCA16250 20-Degree Angled Finish Nail keeps finish work simple
This is a straightforward box of job-ready finish nails for anyone already running a compatible 20 degree DEWALT angled nailer.
- Who it’s for: Finish carpenters, remodelers, trim installers, cabinet builders, and serious DIY users doing interior finish work.
- Why it stands out: The combination of 16 gauge strength, 2-1/2 inch length, galvanized steel, and 2,500-count packaging covers a lot of real trim jobs without overthinking it.
- Worth knowing: This is for interior use only, and angle compatibility matters. If your nailer is not built for 20 degree angled finish nails, do not assume it will fit.
Common Questions
- What size nails are these? These are 16 gauge, 2-1/2 inch finish nails with a 20 degree angled collation.
- What kind of work are they intended for? They are intended for interior finish applications such as window and door casings, trim and crown molding, chair rail, cabinetry, furniture building, and hardwood flooring installation.
- Are these galvanized? Yes. The nails are galvanized steel for added moisture and rust resistance.
- Will they work with every finish nailer? No. They are designed for compatible 20 degree angled finish nailers and are specifically listed for DEWALT cordless angled nailers.
Reviews
There are no reviews yet.