About this item
- The Replacement Part Number(OE Number): F87E-D2A, ZZM0-13-25,195500-3180
- Fitment: for Ford for Ranger 1998-2001 2.5L 153Cu. In. I4, for Mazda B2500 1998-2001 2.5L 2492cc I4
- Fuel-Efficient Injector: High efficient fuel sprays and High Impedance Coil enable fast start up in the cold environments, low fuel consumption, and better performance.
- Professional installation is highly recommended: Fuel injectors directly affect the air/fuel ratio for the engine and new fuel injectors do require a new or updated tune. We also suggest that you check the other component of the engine before installation.
- Flow Rate at 43.5psi/3 bar, 15.4Lb/hr, 116G/min, 161.3cc/min. Package Included: 1 x Fuel Injector; Material: Metal and Plastic; Pin Number: 2; Voltage: DC 12V; Orifice Type: 1 Hole Disc, Flow Rate: 15.4 lb/hr ,161.3 cc/min, Connector Type: EV1
Description:
- Direct replacement of your old injector and no modification needed.
- Made of metal and plastic material which is durable and can use for a long time.
- The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.
Specification:
- O-Rings Included: Yes, preinstalled
- Orifice Type: 1 Hole Disc
- Material: Metal, Plastic
- Color: Silver Tone
- Voltage: DC 12V
- OE Number: F87E-D2A, ZZM0-13-25,195500-3180
- Pin Number: 2
- Dimension: 77x33x25mm / 3.03″x1.30″x0.98″(L*W*H)
- Flow Rate at 43.5psi/3 bar, 15.4Lb/hr, 116G/min, 161.3cc/min
Note:
- Please check the fitment section of this listing before you bid.
- This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools!
- Please kindly check again your engine volume!
- This is a non-OEM product, accessory only!
Fitment:
- for Ford for Ranger 1998-2001 2.5L 153Cu. In. I4
- for Mazda B2500 1998-2001 2.5L 2492cc I4
Package Included:
- 1 x Fuel Injector
Installation:
- Step 1. Make sure the engine is cool down. Disconnect the battery.
- Step 2. Remove the bolts and brackets from the fuel rail.
- Step 3. Disconnect the plug on each injector.
- Step 4. Lift the fuel rail and remove the injector from the fuel rail.
- Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
- Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
- Step 7. Double check for fuel leaks before and after starting the engine.
Reviews
There are no reviews yet.