Key Features
Clean Sheet CutsCuts up to 16 gauge mild steel and up to 19 gauge stainless steel with low sheet distortion. That matters when you need a finished edge that stays usable without extra cleanup. Fast, Controlled CuttingThe variable stroke range of 2,300 to 4,800 strokes per minute gives this sheet metal shear the control for trimming and the speed for longer runs. You can slow it down for accuracy or keep production moving on straight cuts. Lower Blade CostIndexible blades with four usable sides help stretch blade life and keep operating cost down. Quick blade changes also mean less downtime when the edge finally needs to be rotated or replaced.
Overview
The Fein 72303461090 BLS 1.6 E Sheet Metal Shear is a corded sheet metal shear built for trimming and cutting thin sheet stock with clean, controlled results. This is a sheet metal shear designed for cutting and trimming thin steel and stainless steel sheet. Model Number: 72303461090. It is a strong fit for metalworking pros, HVAC installers, drywall contractors handling metal studs and track, and serious fabrication users who need a light tool that can follow a line without beating up the material.
What sets this shear apart is how it balances speed with finish quality. The 350 watt motor delivers a stroke range of 2,300 to 4,800 strokes per minute, with a cutting speed of about 26 to 39 feet per minute. In plain jobsite terms, that means it can move quickly through sheet metal when you have length to cover, but still gives you enough control to stay on layout marks when the cut needs to look right. The open-front cutting head also keeps the cut line visible, which is a big deal when you’re following a pattern or trimming to fit around existing work.
Capacity is where buyers usually decide if a metal shear is worth it, and this one covers common fabrication and finishing work well. It cuts up to 1.6 mm mild steel, 1.2 mm higher-strength steel, and up to 1.0 mm stainless steel, commonly described as up to 16 gauge mild steel and 19 gauge stainless steel. That makes it useful for ductwork, panels, flashing, metal trim, profile work, and other light to medium sheet metal cutting where a cleaner edge matters more than brute-force demolition speed.
Fein also built this tool to stay practical over time. The indexible cutting blades have four usable sides, so you can rotate the blade instead of replacing it right away. That keeps burr-free cutting performance going longer and lowers consumable cost. Sources also indicate a quick blade change system, which helps when you are trying to keep work moving instead of fighting with small parts and readjustment.
On handling, the compact body and light 3.75 lb tool weight make a real difference. A lot of sheet cutting happens off ladders, overhead, or in awkward positions around installed material. A lighter corded metal shear is easier to guide through curves and less fatiguing on repeated cuts. The smallest curve radius is 1/2 in., so it is not just for straight cuts. It is designed to stay accurate on left and right curve work with low distortion to the sheet.
For real-world use, the 16 ft. power cord gives you enough reach to move around a bench, table, or installation area without constantly hunting for another outlet. Because it is corded, you also get steady output without managing battery runtime. If you work in a shop, on site with generator power, or anywhere repeatable cutting performance matters, that is still a major advantage.
The Fein 72303461090 BLS 1.6 E Sheet Metal Shear makes the most sense for users who cut sheet metal regularly and care about edge quality, visibility, and control. If your work involves duct, stainless trim pieces, drywall track, or fabrication parts that need to stay flat after the cut, this tool is built for that kind of job. If you mainly need rough demolition cuts, there are faster ways to destroy material. If you need accurate, distortion-free sheet metal cutting, this is the right kind of tool.
See the Cut and Follow the Line
The nose design gives you a clear view of the cutting line, which helps when the job calls for clean trim work instead of guesswork. That visibility pairs with the compact body to make curve cuts and detail cuts easier to control.
- Open-front cutting head supports accurate tracking on layout lines
- Smallest curve radius is 1/2 in. for tighter turns in sheet metal
- Low-distortion cutting helps keep panels, trim, and profiles usable after the cut
What’s in the Box
- (1) Fein corded sheet metal shear
- (1) Pair of blades, mounted
- (1) Hand guard, mounted
- (1) 2 mm Allen key
- (1) 1/8 in. (3 mm) Allen key
Key Specifications
| Power Source | Corded Electric |
|---|---|
| Power Consumption | 350 W |
| Power Output | 210 W |
| Stroke Rate | 2,300 – 4,800 SPM |
| Cutting Speed | 26 – 39 ft/min |
| Mild Steel Capacity | 1/16 in. (1.6 mm) |
| Stainless Steel Capacity | 3/64 in. (1.0 mm) |
| Smallest Curve Radius | 1/2 in. (15 mm) |
| Cord Length | 16 ft. (5 m) |
| Weight | 3.75 lbs |
| Blade Change | Keyless |
| Made In | Germany |
Built For
Metalworking HVAC Drywall Framing Sheet Metal Fabrication Stainless Steel Trimming Profile Cutting Construction Remodeling
Pro Tip
When the cut starts getting rough, rotate the indexible blade to a fresh side before you assume the tool is slowing down. On a shear like this, a fresh edge usually brings back cleaner cuts faster than forcing the tool through the material.
Warranty & Support
3 Years Limited warranty.
Tool Nut’s Take
Tool Nut’s Take
Fein 72303461090 BLS 1.6 E Sheet Metal Shear for Clean, Controlled Metal Cutting
This is the kind of shear you buy when edge quality and control matter more than simply getting through the material.
- Who it’s for: HVAC crews, sheet metal shops, drywall pros cutting track and studs, and anyone doing repeat trim work in thin steel or stainless.
- Why it stands out: Light weight, strong visibility at the cut line, tight curve ability, and four-sided blades make it practical both in the shop and out on the job.
- Worth knowing: This is a corded tool, which is great for steady output, but it also means you are buying it for accuracy and repeat work, not cordless convenience.
Common Questions
- What material thickness can it cut? It is rated for up to 1/16 in. (1.6 mm) mild steel and up to 3/64 in. (1.0 mm) stainless steel.
- Can it handle curve cuts? Yes. It is designed for curve-compatible cutting and has a smallest curve radius of 1/2 in. (15 mm).
- Is this a corded or cordless metal shear? It is a corded electric sheet metal shear with a 16 ft. (5 m) power cord.
- How are blade changes handled? Source data lists keyless blade change, and the tool uses indexible blades with four usable sides to extend blade life.
Reviews
There are no reviews yet.