Key Features
Cut-Line AccuracyThe integrated splinterguard lines up with your cut path, so setup goes faster and you get cleaner results with less tear-out on cuts with or across the grain. Built for Guided CuttingThis Festool guide rail gives your track saw, router, or jigsaw a straight, repeatable path, which means fewer measuring mistakes and less wasted material. Stable, Light RailThe extruded aluminum profile stays robust without getting cumbersome, and the non-skid strips underneath help keep the rail planted during setup and cutting.
Overview
The Festool 491498 FS 1400 55″ Guide Rail is a precision guide rail for track saw, router, and jigsaw work where straight cuts and repeatable alignment matter. This is a guide rail designed for straight, splinter-free guided cutting and routing. Model Number: 491498. If you are breaking down sheet goods, trimming panels, or making clean finish cuts without dragging material across a stationary saw, this rail is the part of the system that makes that workflow fast and predictable.
At 55 inches long, the FS 1400/2 gives you enough rail to make precision cuts up to 49 inches long with a Festool TS plunge cut saw. That length is a sweet spot for cabinet parts, shelving, panels, and general trim work because it is long enough for common crosscuts and rip work, but still manageable to move, store, and set on a bench or sheet stock. Festool also built the splinterguard right into the rail, so the edge becomes your cut line reference while also helping reduce tear-out.
What makes this setup useful on the job is that it removes a lot of the usual layout fuss. Instead of measuring offsets, clamping makeshift straightedges, and hoping the saw tracks true, you place the Festool 491498 FS 1400 55″ Guide Rail on the mark and go. The non-skid, dual-clamping rubber strips underneath help keep the rail from shifting during setup and cutting, which saves time and helps with cleaner first-pass results. There is also a continuous T-slot on the bottom for unobtrusive clamping when you want added holding power.
The rail itself is made from aluminum, which is exactly what you want here. It keeps the rail rigid enough for accurate work without making it a chore to carry around. Festool also uses a glide strip to reduce friction between the tool and the rail, so the saw or router moves more smoothly along the track. That matters in real use because smooth travel makes it easier to maintain a consistent feed rate and avoid jerky movement that can affect cut quality.
This is not just for plunge saw work either. The system is designed to integrate with Festool plunge routers and jigsaws for expanded capability, so one rail can support several operations in the shop or on site. If you need longer cuts later, the integrated T-slots allow rails to be joined with Festool guide rail connectors, sold separately, for a rigid and continuous connection. That gives you a path to longer rips without replacing the rail you already own.
For jobsite practicality, this style of guide system makes a lot of sense because it brings the tool to the material instead of forcing you to move full sheets or long workpieces across a larger stationary machine. That is safer, easier on your back, and usually more accurate when working alone. It is especially useful in remodeling, finish carpentry, cabinet installation, and small-shop woodworking where space is limited and clean finished edges matter.
If you already run a Festool TS plunge saw, router, or compatible jigsaw setup, this rail is one of those accessories that earns its keep fast. It is for the user who values straight cuts, repeatability, and reduced rework more than gimmicks. If your workflow involves sheet goods, trim panels, countertops, or finish material, the Festool 491498 FS 1400 55″ Guide Rail is a practical upgrade that improves both speed and cut quality.
Cleaner Cuts With Less Setup
The whole point of a guide rail is predictable, straight cutting without wasting time on homemade guides and offset measurements. This rail gives the saw a defined path and keeps your cut line easy to follow.
- Integrated splinterguard serves as the cut line reference
- Helps prevent tear-out and splintering on wood cuts
Stays Put While You Work
A rail that slides around is worse than no rail at all. Festool adds non-skid strips underneath, and the profile also supports clamping through the bottom T-slot when you need extra hold for finished material or repeated cuts.
- Non-skid, self-clamping strips help prevent movement during cutting
- Continuous bottom T-slot allows unobtrusive clamping
More Than a Track Saw Rail
This rail is part of a broader Festool guide system, not a one-tool accessory. That matters if you want one straightedge system for cutting, routing, and layout work instead of a pile of separate guides.
- Works with Festool plunge saws, routers, and jigsaws for expanded capability
- Rails can be joined with guide rail connectors, sold separately, for longer cuts
Built for Smooth Travel
The rail profile is simple, but the details are what make it work well day after day. The aluminum body keeps weight reasonable, and the glide strip reduces friction so the tool moves more fluidly along the track.
- Extruded aluminum profile balances rigidity and portability
- Glide strip helps create smoother saw and router travel
What’s in the Box
- (1) Festool FS 1400/2 55 in. Guide Rail
Guide rail connectors, clamps, saws, routers, and jigsaws are sold separately.
Key Specifications
| Length | 55 in. (1,400 mm) |
|---|---|
| Material | Aluminum |
| Max Guided Cut Length with TS Plunge Cut Saw | 49 in. |
| Tool Category | Guide Rail |
| System Use | Track saws, routers, and jigsaws |
| Made In | Germany |
Compatibility
Track Saw CompatibilityUse the Festool 491498 FS 1400 55″ Guide Rail with Festool TS plunge cut saws, including TS 55 EQ and TS 75 EQ models listed in source data. Router and Jigsaw System UseThe rail is part of the Festool guide system and can also be used with Festool routers and jigsaws for straight guided work. Rail ExpansionIntegrated T-slots allow connection with Festool guide rail connectors, sold separately, to create longer continuous rails.
Built For
Cabinet Installation Finish Carpentry Woodworking Remodeling Sheet Goods Cutting Panel Breakdown Straight Routing Splinter-Free Finish Cuts
Tool Nut’s Take
Tool Nut’s Take
One of those accessories that changes how you work
The Festool 491498 FS 1400 55″ Guide Rail is the kind of system piece that makes your saw, router, or jigsaw more accurate every single day, not just on the occasional perfect setup.
- Who it’s for: Woodworkers, remodelers, cabinet installers, and finish carpenters who need clean straight cuts in sheet goods and finished material.
- Why it stands out: The splinterguard, non-skid strips, aluminum rail body, and multi-tool system compatibility all work together to save setup time and cut down on rework.
- Worth knowing: This is a single 55 inch rail, not a full saw kit. If you need longer runs, plan on guide rail connectors and additional rails.
Common Questions
- What is the length of this Festool guide rail? It is 55 inches long, also listed as 1,400 mm.
- What tools can use this rail? Source data states it is designed for Festool TS plunge cut saws and can also be used with Festool routers and jigsaws.
- Can I connect this rail to another rail? Yes. The integrated T-slots allow rails to be joined using Festool guide rail connectors, sold separately.
- What is the rail made from? The rail is made from aluminum.
Reviews
There are no reviews yet.