Key Features
Controlled Edge RoutingThe dual adjustable fences keep the router tracking square on narrow workpiece edges, which helps you cut cleaner grooves and slots with less guesswork. Dial In the FitAn integrated ruler and long guidance areas make setup easier when you need repeatable routing on edge stock from 13/32 in. to 2-9/32 in. wide. Cleaner Work AreaThe integrated dust port helps pull chips at the source, which matters when you are routing door edges, seals, and hardware mortises indoors or on finished work.
Overview
The Festool OF-FH 2200 Routing Aid is a router accessory built to guide compatible Festool routers along narrow workpiece edges when you need straight, controlled grooves and slots. This is a routing aid designed for edge routing, groove cutting, and slot routing on narrow material. Model Number: 495246. If you regularly rout door edges for drop-down seals, hinge areas, or multipoint locking systems, this accessory gives you more control than trying to balance a router freehand on a thin edge.
What makes this accessory useful is the way it solves a very specific problem: routers are powerful, but narrow stock does not give you much bearing surface. The OF-FH 2200 uses two adjustable fences and long guidance areas to stabilize the router on the edge of the workpiece. That means the base stays supported, the cut tracks more consistently, and you waste less material correcting an off-center groove.
The integrated ruler is not just a nice extra. It speeds up setup when you need to match the guide position to the workpiece width or repeat a previous setting. Tool Nut lists a material accommodation range from 13/32 in. (10 mm) to 2-9/32 in. (50 mm), which covers a lot of edge-routing work on doors, panels, and similar stock. Acme also notes the side stops can be adjusted 60 mm on both sides, giving you added flexibility when centering the router on different profiles.
Festool and Acme both point to accuracy as the real payoff here, and that tracks. On jobs like routing for automatic door seals or multipoint lock hardware, being a little off is not a cosmetic issue. It can turn into hardware fit problems, rework, or replacing a finished part. A stable guidance system is what saves time, especially when you are working on installed or nearly finished doors.
The construction matters too. Acme identifies the body material as solid acrylic glass, and the product images show exactly why that is helpful. You get a clear view of the cutter area and workpiece edge while still having a broad support surface. That makes setup easier and lets you watch your reference points without the accessory getting in the way.
Dust collection is another practical feature here. The integrated dust port improves extraction, which helps keep chips from building up around the bit and reference edge. On edge routing, packed chips can throw off visibility and make an already narrow setup harder to control. Hooked to extraction, this accessory is better suited to clean indoor finish work than a bare setup that throws chips everywhere.
Compatibility is broad within the Festool router lineup. Source data lists fitment for the OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, and OF 2200. Festool specifically highlights expanding the functionality of the OF 1010, OF 1400, and OF 2200 routers, while other source data extends compatibility across additional Festool models. The key point is that this is not a generic guide. It is a Festool router accessory intended for matching Festool routers where controlled edge guidance is the job.
If you are a finish carpenter, door installer, cabinet installer, or shop user doing repeat groove routing on narrow edges, this accessory makes sense. If your routing work is mostly broad surfaces or template routing on wide panels, you may not need it. But if you spend real time routing door edges or slim stock where router stability is the whole game, the Festool OF-FH 2200 Routing Aid earns its place fast.
Festool OF-FH 2200 Routing Aid for Narrow Edge Work
This setup is about giving your router a stable footprint where the workpiece does not. On narrow edges, that extra support makes it easier to keep the cut straight and centered.
- Designed for routing grooves and slots on edges
- Two adjustable fences help guide the router securely
- Useful for door-edge routing where freehand control is limited
Faster Setup, More Repeatable Results
The built-in ruler and adjustable fence layout make this accessory easier to dial in when you need repeat work across multiple parts. That matters on doors, panels, and shop runs where consistency saves time.
- Integrated ruler supports accurate fence positioning
- Accommodates material from 13/32 in. to 2-9/32 in.
- Side stops adjust 60 mm on both sides
Cleaner Cuts on Finished Work
When you are routing indoors or on near-finished pieces, chip control is not optional. The integrated dust port helps you see the cut line better and keeps cleanup from turning into another task.
- Integrated dust port improves dust extraction
- Clear acrylic body helps maintain visibility around the bit area
- Well suited for hardware grooves, seals, and edge slots in wood
Built for Door and Hardware Routing
This is the kind of accessory that pays off on jobs where the groove has to land where it belongs the first time. Door seal grooves and locking hardware mortises are a good example.
- Used for routing grooves for drop-down seals in doors
- Also suited for routing multipoint locking systems on doors
- Helps reduce material waste caused by wandering cuts
What’s in the Box
- (1) Festool OF-FH 2200 Routing Aid
Key Specifications
| Category | Routing Aid / Router Accessory |
|---|---|
| Material | Solid Acrylic Glass |
| Weight (lbs) | 5 lbs |
| Workpiece Capacity | 13/32 in. to 2-9/32 in. (10 mm to 50 mm) |
| Fence Adjustment | 60 mm on both sides |
| Dust Collection | Integrated Dust Port |
Compatibility
Compatible RoutersFits Festool OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, and OF 2200 routers. Dust ExtractionIncludes an integrated dust port to support extractor-connected routing. Application RangeAdjustable to guide edge routing on workpieces from 10 mm to 50 mm thick or wide at the routing area, based on listed material accommodation range.
Built For
Finish Carpentry Door Installation Cabinet Installation Woodworking Remodeling Groove Routing Door Seal Grooves Multipoint Lock Hardware
Pro Tip
Before your first cut, set both fences snug to the workpiece and make a quick test pass on scrap from the same stock. That lets you confirm the groove is centered before you touch the actual door or panel.
Warranty & Support
No manufacturer’s warranty is listed in the provided product data.
Tool Nut’s Take
Tool Nut’s Take
A Smart Add-On for Router Work That Usually Gets Risky Fast
The Festool OF-FH 2200 Routing Aid is the kind of accessory that makes a router behave better on narrow edges where a normal base wants more support than the material gives it.
- Who it’s for: Pros and serious woodworkers routing door edges, narrow panels, grooves for seals, and hardware-related slots.
- Why it stands out: The dual adjustable fences, integrated ruler, clear acrylic body, and dust port all work toward one thing: more control and less wasted material.
- Worth knowing: This is a specialized router accessory, not a general-purpose guide. If you do not route narrow edges often, it may be more tool than you need. If you do, it is a real problem-solver.
Common Questions
- What is this accessory designed to do? It is designed to guide a compatible Festool router along narrow workpiece edges for routing grooves and slots more accurately.
- Which routers does it fit? Provided compatibility data lists Festool OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, and OF 2200 routers.
- Does it support dust extraction? Yes. The product includes an integrated dust port to improve chip and dust collection while routing.
- What kind of work is it commonly used for? It is commonly used for routing grooves for drop-down door seals, door-edge slots, and grooves for multipoint locking systems.
Reviews
There are no reviews yet.