Key Features
Carbide Edge LifeThe carbide-tipped cutter is built for repeated mortising work and is rated to withstand roughly 5,000 to 14,000 joints depending on material. That matters if you are doing production joinery and do not want cutter changes slowing you down. Clean Mortise FitThis DOMINO cutter is sized specifically to create the correct mortise width for Festool 14 mm tenons. You get consistent joint placement and a fit that does not need extra fussing at assembly time. Fast Bit ChangesThe internally threaded design makes swapping cutters straightforward on the DOMINO XL DF 700. That helps when you move between tenon sizes on the same job.
Overview
The Festool 497871 Domino XL Cutter 14mm is a replacement DOMINO cutter for the Festool DOMINO XL DF 700 joiner. This is a DOMINO cutter designed for cutting clean mortises for 14 mm tenons in woodworking and joinery applications. Model Number 497871. If you use the DF 700 for larger frame, door, table, or structural furniture joints, this is the cutter that matches the 14 mm Festool tenon system.
What matters here is fit and repeatability. Festool built this cutter to create the proper mortise width for Festool 14 mm tenons, so the joint comes out consistent from one plunge to the next. That means less time tuning joints by hand and better alignment during glue-up, especially when you are laying out multiple mortises across large stock.
The cutting end is carbide tipped, which is the right move for an accessory like this because cutter life is everything once you start doing real production work. Festool states the bit can withstand about 5,000 to 14,000 joints depending on the material. In practical terms, that gives woodworkers, cabinet shops, and installers a cutter that is made to stay in rotation instead of feeling disposable.
Spiral flutes are another important detail. They help the cutter carve out clean mortises instead of tearing fibers and leaving a rough pocket behind. On joinery work, cleaner mortises mean better tenon fit, cleaner assembly, and less chance of fighting the joint when accuracy matters.
Festool also uses an internally threaded design for quick bit changes. If you already run a DOMINO XL DF 700, you know cutter swaps are part of the workflow whenever the job calls for a different tenon size. This design keeps that process simple and helps you move from one setup to the next without wasting time.
In terms of size, this cutter has a 14 mm diameter and a 70 mm cutter length. That makes it a purpose-built accessory for heavier joinery where the DF 700 platform makes sense. It is not a general drill bit and it is not meant to be used as a universal woodworking cutter. It is made specifically for the Festool DOMINO XL system.
If you are the buyer, the question is pretty simple. If you own a Festool DOMINO XL DF 700 and you need to cut mortises for 14 mm tenons, this is the correct cutter to keep on hand. It makes the most sense for furniture builders, architectural millwork shops, door and gate builders, and anyone doing larger-scale loose tenon joinery where strength and repeatability matter.
Quick Changes, Less Downtime
If you switch tenon sizes regularly, cutter changes need to be simple. This accessory uses an internally threaded design so you can swap sizes on the DOMINO XL DF 700 without turning a quick setup into a slowdown.
- Designed for the Festool DOMINO XL DF 700 joiner
- Internally threaded for quick, easy bit changes
Built for Clean, Consistent Mortises
This cutter is made to do one job right: cut accurate mortises for 14 mm DOMINO tenons. The carbide-tipped head and spiral flute geometry help it cut cleanly and hold up over a lot of joinery work.
- Carbide tipped for long service life
- Spiral flutes help produce clean mortise walls
What’s in the Box
- (1) Festool 497871 Domino XL Cutter 14mm
Key Specifications
| Diameter | 14 mm (1/2 in.) |
|---|---|
| Cutting Length | 70 mm (2-3/4 in.) |
| Material | Carbide tipped |
| Material Cut | Wood |
| Weight | 0.14 lbs |
| Suitable For | Festool DOMINO XL DF 700 |
| Tenon Size | 14 mm |
| Made In | Germany |
Compatibility
Joiner PlatformFits the Festool DOMINO XL DF 700 joiner. Tenon MatchCuts mortises sized for Festool 14 mm tenons. ApplicationIntended for wood joinery where the DF 700 platform is used for larger loose tenon joints.
Built For
Woodworking Furniture Building Cabinetry Architectural Millwork Door Construction Loose Tenon Joinery
Pro Tip
If you keep more than one DF 700 cutter size on hand, label the storage tube or drawer by tenon size and keep a fresh cutter ready for the material you run most. On joinery-heavy jobs, that makes setup changes faster and helps you avoid grabbing the wrong cutter when you are moving quickly.
Tool Nut’s Take
Tool Nut’s Take
Festool 497871 Domino XL Cutter 14mm Is the Right One for Big DOMINO Joinery
If you own the DF 700 and cut 14 mm tenon mortises with any regularity, this is not an optional extra. It is the correct cutter for the job.
- Who it’s for: Woodworkers, cabinet shops, and millwork pros using the Festool DOMINO XL DF 700 for larger joinery.
- Why it stands out: Carbide tipping, spiral flutes, and a size that matches Festool 14 mm tenons give you the clean fit and repeatability the DOMINO system is known for.
- Worth knowing: This is a dedicated joiner accessory, not a universal cutter. Make sure your workflow and tenon size actually call for the 14 mm format.
Common Questions
- What machine is this cutter made for? It is suitable for the Festool DOMINO XL DF 700 joiner.
- What tenon size does it match? It is designed to create the proper mortise width for Festool 14 mm tenons.
- What material is the cutter made from? It is a carbide-tipped cutter designed for wood joinery applications.
- How long is the cutter? The cutter length is 70 mm, or 2-3/4 inches.
Reviews
There are no reviews yet.