Key Features
220 lb Carry CapacityBuilt to move a full stack of Systainers and Sortainers without turning your loadout into multiple trips. That matters when you need more tools at the work area and less walking back to the van. Made for Rough GroundLarge rear wheels, lockable front casters, and stair-climbing strips help this Systainer cart stay useful when the path is not smooth. You get easier movement on jobsites, in hallways, and over steps. Drawer for Small PartsThe integrated drawer holds up to 11 lbs of fasteners, tape, and small essentials so the items you reach for constantly are not buried in your stack. It saves time every time you stop to work.
Overview
The Festool 498660 Sys-Roll Systainer Cart is a rolling transport cart for moving stacked Festool storage cases around the jobsite, shop, or finished home. This is a Systainer cart designed for transporting stacked Festool Systainers and Sortainers from one work area to another with less strain and fewer trips. Model Number 498660. If you already work out of the Festool storage system, this cart turns that stack into a mobile loadout instead of dead weight you have to carry.
The big selling point here is capacity without bulk. The cart itself weighs 14.33 lbs, but it is rated for a total load capacity of 220.46 lbs. That gives you a lot of room to move multiple tool cases, accessories, and consumables in one shot while still keeping the carrier light enough to lift in and out of a vehicle. Festool also built in an adjustable safety belt so the stack stays together when you are moving across rough surfaces or turning corners.
Jobsite movement is where this thing earns its keep. The large 8 in rear wheels are paired with 3 in rotating front rollers that lock, so you get a mix of straight tracking and easy maneuvering. Festool also added stair-climbing strips to help when you need to go up or down steps. That matters if you work in remodels, punch-list work, service calls, or any site where elevators and smooth floors are not guaranteed.
The integrated drawer is more useful than it looks. It carries up to 11.02 lbs and gives you a dedicated place for small parts, layout gear, tape, hand tools, or the hardware you need for the next step of the job. Instead of opening a full Systainer stack just to grab a few screws or anchors, you can keep the high-use items at the bottom and get to them fast.
From a design standpoint, this is built around the Festool storage system rather than being a generic folding hand truck. It is suitable for transporting Systainer3, T-LOC, and Classic cases, which is the real reason to buy it. The cart becomes part of the system, not just a way to drag boxes around. Festool also notes that it is not compatible with SYS-MINI, SYS-MIDI, and SYS-MAXI Systainers, so it is best for users already working with the standard compatible case formats.
It is also a good fit for finished-space work. Festool calls out large non-marring wheels and casters, which matters if you are rolling into customer homes, offices, or completed interiors where floor scuffs are a real concern. Between the locking front casters and the strapped stack, the cart stays put better when parked and feels more controlled when moving through tight spaces.
Who should buy it? This is a smart add-on for cabinet installers, finish carpenters, service techs, punch-list crews, and anyone already invested in Festool Systainers. It is also useful for shop-to-truck organization if your tools live in cases and move often. If you do not use compatible Systainers, it is overkill. But if you do, the Festool 498660 Sys-Roll Systainer Cart is one of those pieces that makes the whole storage system work a lot harder on real jobs.
Move a Full Stack Without Fighting It
This cart is built for the guy who shows up with a stack of tools, not one box at a time. Strap the cases together, roll them in, and keep everything organized at the point of work.
- Total load capacity is 220.46 lbs
- Adjustable safety belt helps keep the stacked load secure
Keep Small Parts Within Reach
The drawer is not just a bonus feature. It is the part that keeps you from digging through your whole stack for the little stuff that slows a job down.
- Drawer load capacity is 11.02 lbs
- Useful for fasteners, tape, layout items, and daily-use accessories
Handles Rougher Ground Better Than a Basic Dolly
Big rear wheels and a stable base give this cart a real advantage when the route to the work area is not smooth. It is made for actual jobsite movement, not just warehouse floors.
- Rear wheel diameter is 8 in and front roller diameter is 3 in
- Integrated stair-climbing strips help on steps and obstacles
Light Cart, Serious Payload
At just over 14 lbs, this cart is easy to lift into a truck or hang up when you are done. The point is simple: you are not adding a lot of dead weight just to gain mobility.
- Cart weight is 14.33 lbs
- Overall dimensions are 17 in x 23-1/2 in x 43 in
Key Specifications
| Total Load Capacity | 220.46 lbs (100 kg) |
|---|---|
| Drawer Load Capacity | 11.02 lbs (5.00 kg) |
| Weight | 14.33 lbs (6.5 kg) |
| Dimensions (L x W x H) | 17 in x 23-1/2 in x 43 in |
| Rear Wheel Diameter | 8 in (200 mm) |
| Front Roller Diameter | 3 in (75 mm) |
| Material | Long fiber plastic and steel |
| Made In | Germany |
Compatibility
Compatible Storage Cases Suitable for transporting Festool Systainer3, T-LOC, and Classic cases. Also Fits Capable of carrying tools and accessories stored in Festool Sortainers. Not Compatible Not compatible with SYS-MINI, SYS-MIDI, and SYS-MAXI Systainers.
Built For
Finish CarpentryCabinet InstallationRemodelingService WorkPunch List JobsShop to Jobsite Transport
Pro Tip
Put your heaviest Systainer at the bottom and keep the drawer loaded with the small parts you reach for most. The cart stays more stable, and you will stop tearing into the whole stack just to grab tape, anchors, or screws.
Warranty & Support
3-year limited warranty.
Tool Nut’s Take
Tool Nut’s Take
Festool 498660 Sys-Roll Systainer Cart for crews who are done making extra trips
This is the kind of system accessory that seems optional until you use it for a week, then you do not want to work without it.
- Who it’s for: Pros already using Festool Systainers who want faster setup, cleaner organization, and easier tool transport on remodel and finish jobs.
- Why it stands out: High 220 lb load rating, useful integrated drawer, and wheel setup that makes more sense on real jobsites than a basic shop dolly.
- Worth knowing: It is only a smart buy if your case setup is compatible. Festool specifically says no SYS-MINI, SYS-MIDI, or SYS-MAXI.
Common Questions
- How much weight can this cart carry? The total load capacity is 220.46 lbs (100 kg).
- Does the drawer have its own weight limit? Yes. The integrated drawer is rated for 11.02 lbs (5.00 kg).
- Which Festool cases fit the SYS-Roll 100? It is suitable for Systainer3, T-LOC, and Classic cases, and Festool also notes it can carry loaded Sortainers.
- Will it work with SYS-MINI, SYS-MIDI, or SYS-MAXI? No. Festool states that the SYS-Roll is not compatible with SYS-MINI, SYS-MIDI, and SYS-MAXI Systainers.
Reviews
There are no reviews yet.