Key Features
18-Tooth Fast CutThe 18-tooth layout is built for efficient wood cutting when speed matters. It is a smart choice for rough cutting, framing stock, and general jobsite work where you want clean results without slowing down. Triple Chip Tooth DesignFestool uses a trapezoidal flat tooth pattern to keep the cut smoother and more efficient in wood. That means less resistance through the material and better control during the cut. Thin Kerf, Lower VibrationThe 1.8 mm cutting width helps reduce drag and waste, while laser-cut expansion slots and the oversized arbor help keep vibration down for quieter, more precise cuts.
Overview
The Festool 500461 Saw Blade WOOD STANDARD HW 160×1.8×20 W18 is a 6-1/4 inch circular saw blade made for wood cutting on select Festool plunge-cut and carpentry saws. This is a circular saw blade designed for fast, efficient wood cutting. Model Number 500461. If you run a Festool TS 55 F, TSC 55 K, TSC 55 KS, HK 55, HKC 55, or HKC 55 K and want a blade set up for productive jobsite cutting, this blade is built to do that without wasting motion or material.
The big story here is the combination of an 18-tooth pattern and a thin 1.8 mm cutting width. In plain terms, that means the blade removes less material as it cuts, so it meets less resistance in the wood. That helps the saw cut more efficiently and can make a noticeable difference when you are working through framing lumber, sheet goods, or general carpentry stock and do not want the saw bogging down.
Festool also uses a triple chip tooth design, listed here as tooth shape W. Instead of a basic tooth layout, the beveled and flat tooth pattern is designed to improve cutting efficiency and leave a smoother result. That matters when you want a blade that can move quickly but still stay controlled through the workpiece, especially on repeated cuts during remodeling, trim prep, or site-built carpentry.
On the build side, this blade uses laser-cut expansion slots to reduce vibration. That is not just a spec-sheet detail. Less vibration usually means a steadier feel in the saw, less noise during the cut, and a cleaner path through the material. Festool also calls out the oversized 20 mm arbor as a way to secure the blade more firmly to the saw, which helps support more precise cutting.
The dimensions are right in the sweet spot for Festool’s 55-class saw platform: 160 mm diameter, 20 mm arbor hole, 1.8 mm cutting width, and 1.20 mm standard blade thickness. Those numbers matter because blade fit is not something you want to guess at. If you own one of the compatible saws, this blade matches the required format so you can keep the saw performing the way it was designed to.
This blade is best for users who want a dependable wood-cutting setup for general carpentry rather than a specialty finish blade. Contractors, remodelers, framers, and serious DIY users will get the most from it. If your work leans toward everyday wood cutting and you want the right Festool blade for the compatible TS, TSC, HK, or HKC saws, this is the straightforward, no-nonsense option.
Festool 500461 Saw Blade WOOD STANDARD HW 160×1.8×20 W18 in Real Wood-Cutting Work
This blade is built for wood cutting where efficiency matters more than showpiece finish work. The tooth count, kerf, and anti-vibration design work together to keep the saw moving smoothly through the cut.
- 18-tooth blade geometry for fast wood cutting
- 1.8 mm cutting width helps reduce resistance and material waste
- Laser-cut expansion slots help reduce vibration for quieter, steadier cutting
Key Specifications
| Diameter | 6-1/4 in (160 mm) |
|---|---|
| Arbor Hole | 20 mm |
| Tooth Count | 18 |
| Tooth Shape | W |
| Chip Angle | 25° |
| Cutting Width | 5/64 in (1.8 mm) |
| Blade Thickness | 1.20 mm |
| Weight | 0.6 lb |
Compatibility
Compatible Saws Fits Festool TS 55 F, TSC 55 K, TSC 55 KS, HK 55, HKC 55, and HKC 55 K saws. Blade Interface Uses a 20 mm arbor hole and 160 mm blade diameter format for the listed Festool saw platforms. Primary Material Designed as a WOOD STANDARD blade for wood cutting applications.
Built For
CarpentryConstructionRemodelingWood CuttingGeneral ContractingDIY / Hobbyist
Tool Nut’s Take
Tool Nut’s Take
A smart everyday wood blade for the Festool 55-platform saws
The Festool 500461 Saw Blade WOOD STANDARD HW 160×1.8×20 W18 makes sense for users who want fast, efficient wood cutting with the right fit for their Festool saw, not a one-size-fits-all substitute.
- Who it’s for: Users running compatible TS, TSC, HK, or HKC 55 saws for general carpentry, remodeling, and jobsite wood cutting.
- Why it stands out: The 18-tooth layout, thin kerf, triple chip tooth design, and vibration-reducing slots give it a practical balance of speed, control, and clean cutting.
- Worth knowing: This is a purpose-fit blade for specific Festool saws, so check your model before you order. If you need a blade for fine finish work above all else, you may want a different tooth count.
Common Questions
- What saws does this blade fit? Festool lists it as suitable for TS 55 F, TSC 55 K, TSC 55 KS, HK 55, HKC 55, and HKC 55 K.
- What size is this blade? It has a 6-1/4 inch (160 mm) diameter with a 20 mm arbor hole.
- How many teeth does it have? This blade has 18 teeth.
- What material is it designed to cut? It is listed as a WOOD STANDARD blade and is intended for wood cutting applications.
Reviews
There are no reviews yet.