Key Features
Large Joinery StockThis assortment is built around 12 mm and 14 mm DOMINO XL tenons for bigger glue surface and stronger loose-tenon joints in heavy furniture, doors, frames, and structural wood assemblies. Organized Systainer StorageThe Systainer3 M 187 keeps the tenons separated in three compartments, so you spend less time sorting sizes and more time cutting and assembling parts. Festool 576792 Domino XL Assortment Systainer3 (12mm / 14mm)You get the D14 DOMINO cutter in the box along with a full spread of tenon sizes, which makes this a ready-to-work setup for the Festool DF 700 instead of a parts-chasing exercise.
Overview
The Festool 576792 Domino XL Assortment Systainer3 (12mm / 14mm) is a tenon assortment kit for the Festool DOMINO XL system. This is a DOMINO tenon assortment designed for mortise-and-tenon joinery with the Festool DF 700. Model Number: 576792. It is aimed at woodworkers, cabinet shops, furniture builders, and contractors who need larger loose tenons for strong alignment and glue-up in heavier stock.
What makes this kit matter is that it covers the larger end of the DOMINO XL range in one organized package. You get 12 mm and 14 mm beech tenons in 100 mm and 140 mm lengths, plus the 14 mm cutter needed to machine mortises for the larger size. In practical terms, that means you can go straight from layout to cutting to assembly without ordering tenons and the matching cutter separately.
Festool built these tenons from solid hardwood and shaped them as true floating tenons for mortise-and-tenon work. The flat, elongated profile resists rotation, which helps keep face frames, legs, rails, and edge joints lined up during glue-up. The embossed glue pockets and the slightly shorter overall length are not filler details. They leave room for glue in the mortise so parts seat properly instead of hydraulic-locking when you clamp them together.
The storage setup is a big part of the value here. The included Systainer3 M 187 uses three compartments so the different DOMINO sizes stay separated and easy to grab. If you use a DF 700 regularly, that kind of organization saves real time because the larger tenons are always where they should be, and the removable bins make it easier to restock or carry only what you need to the bench or jobsite.
On the work side, this assortment is best suited for larger joinery tasks where smaller tenons are not enough. Think table bases, long rails, entry doors, passage doors, bed frames, benches, and other wide or thick solid wood and plywood assemblies. Festool specifically positions these tenons for furniture, cabinetmaking, casing, and frame work, and that lines up with how most DF 700 owners use the machine: bigger parts, bigger joints, and fewer compromises.
Compatibility is straightforward. This assortment is suitable for the Festool DF 700 DOMINO joiner and includes the D 14-NL 70 HW-DF 700 DOMINO cutter. If you already own the DF 700, this kit gives you a clean way to stock two core large-format tenon sizes. If you are buying into the XL platform, it is one of the simplest ways to cover common 12 mm and 14 mm joinery without piecing the system together one box at a time.
Who should buy it? Anyone using the DF 700 for demanding wood joinery. If you build furniture at scale, install large casework, make doors, or do architectural millwork where joint strength and registration matter, this assortment makes sense. If your work stays in lighter stock and smaller parts, it is probably more kit than you need. But for bigger assemblies, this is the organized, ready-to-use refill-and-storage setup that keeps the DOMINO XL system efficient.
Keep Large Tenons Sorted and Ready
This kit is as much about workflow as it is about joinery. When the tenons are separated by size and the matching cutter stays in the same case, setup gets faster and mistakes get less likely.
- Systainer3 M 187 with three storage compartments
- Removable plastic bins help keep tenon sizes separated
Built for Strong, Accurate Joinery
The DOMINO shape matters. Its flat profile helps prevent rotation, which keeps parts aligned during glue-up and makes larger assemblies easier to manage when clamps are going on fast.
- Designed for mortise-and-tenon joinery in furniture and frame work
- Works in both plywood and solid wood applications
Glue-Friendly Tenon Design
Festool adds glue pockets and leaves the tenons slightly short of nominal length so adhesive has somewhere to go. That helps joints seat fully and keeps glue-up cleaner and more predictable.
- Embossed glue pockets improve glue distribution
- Tenons are approximately 2 mm shorter than nominal length to leave glue space in the mortise
What’s in the Box
- (40) DOMINO Beech Tenons, 12 mm x 100 mm
- (40) DOMINO Beech Tenons, 12 mm x 140 mm
- (16) DOMINO Beech Tenons, 14 mm x 100 mm
- (32) DOMINO Beech Tenons, 14 mm x 140 mm
- (1) DOMINO Cutter D 14-NL 70 HW-DF 700
- (1) Systainer3 SORT-SYS3 M 187 DOMINO
At a Glance
128Total Tenons Included 12 mm / 14 mmTenon Sizes 3Storage Compartments DF 700Compatible Joiner
Key Specifications
| Product Type | DOMINO Assortment |
|---|---|
| Compatible Tool | Festool DF 700 |
| Tenon Sizes | 12 mm and 14 mm |
| Tenon Lengths | 100 mm and 140 mm |
| Tenon Material | Solid beech hardwood |
| Included Cutter | D 14-NL 70 HW-DF 700 |
| Storage Case | Systainer3 M 187 |
| Item Weight | 2.3 kg |
Compatibility
Machine CompatibilitySuitable for the Festool DF 700 DOMINO joiner. Cutter IncludedIncludes the D 14-NL 70 HW-DF 700 DOMINO cutter for 14 mm tenons. Material UseIntended for joinery in plywood and solid wood applications.
Built For
Furniture Making Cabinetmaking Frame Work Door Construction Architectural Millwork Woodworking Shop Assembly Large Mortise-and-Tenon Joinery
Pro Tip
Keep the 12 mm and 14 mm tenons in their separate bins and leave the D14 cutter in the Systainer instead of tossing it in a drawer. On bigger glue-ups, that small bit of organization is what keeps you from cutting the right mortise with the wrong setup.
Tool Nut’s Take
Tool Nut’s Take
Festool 576792 Domino XL Assortment Systainer3 (12mm / 14mm) is the smart way to stock a DF 700
If you already own the DOMINO XL, this kit saves you from buying the larger tenons and the matching cutter piece by piece.
- Who it’s for: DF 700 users building bigger furniture, doors, frames, and other heavy wood assemblies where smaller tenons are not the right answer.
- Why it stands out: You get the core 12 mm and 14 mm tenon assortment, the 14 mm cutter, and a Systainer3 that keeps the whole setup organized and portable.
- Worth knowing: This is a focused XL assortment, not a universal DOMINO refill for every machine. It makes the most sense if the DF 700 is already part of your joinery workflow.
Common Questions
- Which machine is this assortment for? It is suitable for the Festool DF 700 DOMINO joiner.
- Does it include the cutter needed for larger tenons? Yes. The kit includes the D 14-NL 70 HW-DF 700 DOMINO cutter.
- What tenon sizes are included? The assortment includes 12 mm and 14 mm tenons in 100 mm and 140 mm lengths.
- What kind of work is it meant for? It is intended for mortise-and-tenon joinery in furniture, cabinetmaking, casing, frame work, plywood, and solid wood applications.
Reviews
There are no reviews yet.