Key Features
Digital Cut ControlThe Festool 577372 CSC SYS 50 EBI-Basic-Set Cordless Table Saw lets you set blade height and bevel angle on the digital display to within 0.1 mm. That means repeatable cuts without eyeballing settings or second-guessing fence setup. Cordless Table Saw PowerThe dual 18V battery setup and brushless motor are built to give this cordless table saw jobsite-ready cutting power. You get the portability of cordless without giving up the kind of output needed for solid wood rip cuts. Systainer-Compact BuildThis saw is built to pack down into a Systainer-sized footprint for transport and storage. If you work punch list, trim, cabinet installs, or interior finishing, that compact format matters every time you load in and out.
Overview
The Festool 577372 CSC SYS 50 EBI-Basic-Set Cordless Table Saw is a portable cordless table saw built for precise finish work, trim fitting, and clean jobsite ripping and crosscutting. This is a table saw designed for interior finishing and mobile cutting where accuracy matters as much as portability. Model Number: 577372. If you need workshop-style control in a saw you can actually carry to the job, this is the whole point of the CSC SYS 50 platform.
What makes this saw different is how much control it gives you in a very small footprint. Festool built in digital adjustment for blade height and bevel angle, with settings accurate to within a tenth of a millimeter. On the job, that means less trial-and-error when you are fitting finished material, dialing in repeat cuts, or matching a bevel that has to land right the first time. Festool also lets you save four saw blade positions in the display, which is the kind of feature that saves real time when you bounce between common setups.
Capacity is where this compact saw proves it is not just a trimmed-down benchtop unit. It handles parallel cuts up to 280 mm, cross cuts up to 450 mm, and bevel cuts from -10 degrees to 47 degrees. There is also miter capability from -70 degrees to +70 degrees using the miter gauge and sliding table setup. That range gives you enough flexibility for filler strips, trim parts, flooring transitions, interior panels, and other finish carpentry cuts that usually require either multiple tools or a bigger shop saw.
The fence and guide setup are clearly aimed at repeatable accuracy. Festool uses a robust rip fence with double clamp action for exact alignment, and the miter gauge is centrally clamped through the sliding table groove for more stable angle control. That matters when you are cutting finished stock where drift, fence deflection, or small setup errors show immediately. This is not just about making a cut. It is about making the same cut again without fighting the tool.
From a design standpoint, the CSC SYS 50 is built around portability without making the saw feel stripped down. It packs into a Systainer-compatible format, can be carried one-handed, and is designed to work with the UG-CSC-SYS wheeled underframe for easier transport and a more comfortable working height. For remodelers, trim carpenters, and installers who move room to room or job to job, that compact form is a major advantage over hauling a larger site saw for finish-focused work.
Power comes from Festool’s dual-battery 2 x 18V system paired with a brushless EC-TEC motor. Festool specifically positions it as delivering corded-like performance, including for rip cuts in solid wood. That is the real question with any cordless table saw, and it is where this one is aimed squarely at pros who want mobility without stepping down too far in output. It is a battery-powered jobsite saw, but it is meant to do accurate production work, not just quick light-duty cuts.
For jobsite practicality, the saw includes a clear blade guard and dust collection bag, and the compact body keeps transport and storage under control when space is tight. Festool also ties the saw into its app ecosystem for additional blade-position storage, which is useful if you rely on saved settings across recurring tasks. The digital interface can be set in different languages, which is a nice touch for crews and shops with mixed users.
Who should buy this? If you are a finish carpenter, cabinet installer, remodeler, flooring installer, or serious woodworker who needs precise cutting on site, this saw makes a lot of sense. If your work leans more toward rough framing and heavy sheet breakdown all day, a larger traditional jobsite table saw may still be the better fit. But for clean, accurate, portable cutting, the Festool 577372 CSC SYS 50 EBI-Basic-Set Cordless Table Saw is built for the kind of work where bad cuts cost time, material, and callbacks.
Set Cut Height and Bevel With Real Precision
This is the feature that separates the saw from typical compact table saws. Instead of nudging settings by feel, you can dial in blade height and bevel angle on the display and get repeatable results faster.
- Digital adjustment accurate to within 0.1 mm
- Four blade positions can be saved for recurring setups
Portable Size Without Giving Up Useful Capacity
The compact body is a big deal, but the real value is that it still handles the kind of cuts finish crews actually need on site. You get meaningful rip, crosscut, bevel, and miter range in a saw that stores far easier than a full-size site saw.
- Parallel cut capacity up to 280 mm
- Cross-cut width up to 450 mm
- Bevel range from -10 degrees to 47 degrees
Built for Clean, Repeatable Finish Work
Accuracy on a table saw is not just blade speed. It is fence alignment, stable angle control, and setups you can trust when the stock is already finished. Festool clearly built this saw around that kind of work.
- Rip fence uses double clamp action for exact alignment
- Miter gauge is centrally clamped in the sliding table groove for stable angle cuts
Key Specifications
| Power Source | Dual battery cordless system |
|---|---|
| Voltage (V) | 2 x 18V |
| Motor Type | Brushless EC-TEC |
| Parallel Cut Capacity | 11 in (280 mm) |
| Cross-Cut Capacity | 17-3/4 in (450 mm) |
| Bevel Range | -10° to 47° |
| Miter Range | -70° to +70° |
| Weight (lbs) | 107.5 lb |
Compatibility
Battery PlatformUses Festool’s 18V lithium-ion battery platform in a dual-battery 2 x 18V configuration. Transport SystemSystainer-compatible design for compact transport and storage. App ConnectivityLinks with the Festool App for additional saw blade position storage. Underframe OptionDesigned to work with the UG-CSC-SYS wheeled underframe for transport and working height support.
Built For
Interior Finishing Finish Carpentry Cabinet Installation Remodeling Trim Work Flooring Transitions Woodworking Jobsite Cutting
Pro Tip
Save your most-used blade settings in the digital display before starting trim or cabinet install work. If you are bouncing between repeat rip widths and bevel cuts, that shortcut is faster and more consistent than dialing the saw back in every time.
Tool Nut’s Take
Tool Nut’s Take
Small Footprint, Serious Accuracy
The Festool 577372 CSC SYS 50 EBI-Basic-Set Cordless Table Saw is for the guy who needs true table saw precision on site and is tired of dragging around more saw than the job calls for.
- Who it’s for: Finish carpenters, remodelers, installers, and woodworkers who care more about exact cuts and portability than raw sheet-good throughput.
- Why it stands out: The digital height and bevel control, compact Systainer-style form factor, and genuinely useful cut capacity make it one of the most interesting cordless table saws out there.
- Worth knowing: This is a premium, precision-first saw. If your day is mostly rough framing or big production ripping, a larger traditional site saw may still be the better play.
Common Questions
- What kind of tool is this? This is a cordless table saw designed for portable precision cutting, especially interior finishing, trim work, and repeatable jobsite cuts.
- How accurate are the digital adjustments? Festool states the blade height and bevel angle can be set on the digital display to within 0.1 mm.
- What cut capacity does it offer? It handles parallel cuts up to 11 inches (280 mm) and cross cuts up to 17-3/4 inches (450 mm), with bevel cuts from -10 degrees to 47 degrees.
- Is it cordless or corded? It is cordless and runs on Festool’s dual-battery 2 x 18V lithium-ion setup.
Reviews
There are no reviews yet.