Key Features
Digital Cut AccuracyThe Festool CSC SYS 50 EBI-Set cordless table saw lets you set blade height and bevel angle by digital control to within 0.1 mm. That means less trial-and-error fitting and more repeatable finish work on site. 2 x 18V Cordless PowerThe dual-battery setup and Brushless EC-TEC motor are built to give this portable table saw corded-style cutting power without tying you to an outlet. That matters when you’re trimming, fitting, and installing in finished spaces. Real Jobsite CapacityWith parallel cuts up to 11 in., cross-cuts up to 17-3/4 in., and bevel cuts from -10° to 47°, this saw covers a wide range of interior finish cuts in a package you can actually carry.
Overview
The Festool 577383 CSC SYS 50 EBI-Set Cordless Table Saw is a compact battery-powered table saw built for precise finish cutting on the go. This is a table saw designed for portable cross-cutting, rip cutting, and bevel cutting on jobsites and interior installation work. Model Number: 577383. If you need workshop-style accuracy without dragging a full-size saw and extension cord through a house or remodel, this is exactly the kind of machine Festool built it to be.
Where this cordless table saw separates itself is control. Festool uses a digital adjustment system that sets blade height and bevel angle at the push of a button, accurate to within a tenth of a millimeter. In real use, that means dialing in repeat cuts for trim, filler strips, panels, and finish material without sneaking up on every setting by hand. You can also save four blade positions, which is a real time-saver when you’re bouncing between repeated cut setups during installation work.
Capacity is strong for a saw this compact. It handles parallel cuts up to 11 inches, cross-cuts up to 17-3/4 inches, and bevel cuts from -10° to 47°. Festool also calls out a cutting height up to 1-3/8 inches at bevel applications and a guaranteed cutting height of 48 mm for interior finishing work. That makes it a practical fit for trim carpentry, built-ins, flooring transitions, filler work, cabinet scribing, and other detailed cutting where clean fit matters more than raw sheet-goods throughput.
The fence and guiding setup are a big part of why this saw is more than just a small table saw. The rip fence uses a double-clamp design for exact alignment, and the miter gauge is centrally clamped through the sliding table groove for more reliable angle work. Festool also gives you miter capability from -70° to +70°, which opens the door for a lot of accurate angle cutting that would be a hassle on many compact jobsite saws.
Power comes from Festool’s dual 18V battery platform paired with a Brushless EC-TEC motor. Festool specifically positions the saw as delivering output and torque that feel comparable to a corded machine, even on rip cuts in solid wood. For the buyer, the important part is simple: this is not a light-duty novelty saw. It is meant to do real cutting work where portability, setup speed, and clean accuracy matter.
Design-wise, the whole point is mobility. The saw is compact enough to fit Systainer-style storage and can be carried one-handed. Festool also offers compatibility with the UG-CSC-SYS wheeled underframe for easier transport and a more comfortable working height. That makes this a smart option for installers and finish crews who move room to room, floor to floor, or house to house and do not want a bulky saw eating up van space.
If you already work in the Festool cordless system, the platform fit makes even more sense. The saw runs on Festool Lithium-Ion batteries in a 2 x 18V configuration, and Festool notes smartphone app connectivity for storing additional blade positions. That system approach matters because it keeps power, transport, and workflow more organized, especially for contractors already using Systainers and Festool batteries across the truck.
Who should buy it? This saw makes the most sense for trim carpenters, cabinet installers, remodelers, punch-out crews, and serious woodworkers who need top-end accuracy in a portable package. If your day is mostly interior finishing, precise fitting, and controlled cuts in finished spaces, the Festool 577383 CSC SYS 50 EBI-Set Cordless Table Saw brings a lot to the table. If you mainly break down large sheet goods all day, you will probably still want a larger dedicated shop or jobsite setup beside it.
Precise Setup Without Guesswork
This is where the saw earns its keep. The digital height and bevel adjustment system takes a lot of the guesswork out of setup, especially when you need repeatable finish cuts that actually fit the first time.
- Digitally adjusts blade height and bevel angle to within 0.1 mm
- Stores four saw blade positions for repeat setups
- Parallax-free digital setting in millimeters and inches
Compact Size, Serious Cutting Range
The footprint stays small, but the cutting range is broad enough for a lot of real interior work. That is the appeal here: you get a portable saw that still handles rip cuts, cross-cuts, bevels, and miter work without feeling like a compromise piece.
- Parallel cuts up to 11 in. (280 mm)
- Cross-cut width up to 17-3/4 in. (450 mm)
- Bevel cuts from -10° to 47° and miter angles from -70° to +70°
Built to Travel Better
Festool clearly designed this platform around transport and organization, not just cutting performance. For installers and remodelers, that matters because a saw that packs cleanly and moves easily gets used more often and set up faster.
- Systainer-compatible format for transport and storage
- Can be carried with one hand
- Compatible with the wheeled UG-CSC-SYS underframe for easier movement and upright working height
Key Specifications
| Power Source | 2 x 18V Festool Lithium-Ion batteries |
|---|---|
| Motor Type | Brushless EC-TEC |
| Parallel Cut Capacity | 11 in. (280 mm) |
| Cross-Cut Capacity | 17-3/4 in. (450 mm) |
| Bevel Range | -10° to 47° |
| Miter Angle Range | -70° to +70° |
| Cutting Height at Bevel Applications | 1-3/8 in. (35 mm) |
| Guaranteed Cutting Height | 48 mm |
Compatibility
Battery Platform Runs on Festool’s 18V Lithium-Ion battery platform in a dual-battery 2 x 18V configuration. Transport System Designed around Systainer-compatible storage and transport for organized mobile setup. Underframe Support Compatible with the Festool UG-CSC-SYS wheeled underframe for transport and upright working height. App Connectivity Can link with the Festool App on a smartphone for additional saw blade position storage.
Built For
Finish CarpentryCabinet InstallationInterior RemodelingTrim WorkBuilt-InsPunch List WorkWoodworkingMobile Jobsite Cutting
Pro Tip
Use the saved blade-position presets for the cuts you repeat most, like filler strips or trim stock. On a saw this precise, that is one of the fastest ways to turn setup time into actual cutting time.
Tool Nut’s Take
Tool Nut’s Take
Festool 577383 CSC SYS 50 EBI-Set Cordless Table Saw for finish guys who refuse to give up accuracy
This is a premium portable table saw that makes a real case for bringing shop-level precision straight to the install site.
- Who it’s for: Trim carpenters, cabinet installers, remodelers, and serious woodworking users who need clean, repeatable cuts away from the shop.
- Why it stands out: The digital height and bevel control, dual 18V cordless power, and genuinely useful cut capacity make it a different animal than the average compact jobsite saw.
- Worth knowing: This is built around precision and portability, not replacing a full-size production saw for nonstop sheet-goods work. If your work is finish-heavy, that trade makes a lot of sense.
Common Questions
- Is this a corded or cordless table saw? It is a cordless table saw that runs on Festool’s dual 18V Lithium-Ion battery setup.
- How accurate are the saw’s digital adjustments? Festool states the blade height and bevel angle can be adjusted by digital control to within 0.1 mm.
- What is the maximum cross-cut capacity? The saw handles cross-cuts up to 17-3/4 inches (450 mm).
- Can it make bevel and miter cuts? Yes. It offers bevel cuts from -10° to 47° and miter angles from -70° to +70°.
Reviews
There are no reviews yet.