Key Features
CENTROTEC Fast ChangesThe CENTROTEC shank gives this Festool brad point drill bit set quicker swaps, better bit stability, and less runout. That means cleaner starts and less time fumbling with chuck changes. Clean Wood BoringBrad point tips are built for accurate hole placement in wood and plastic. Wide flutes help clear chips fast so the cut stays cleaner and the bit runs cooler. Useful Size SpreadWith seven common sizes from 1/8 inch to 1/2 inch in a dedicated case, you get a practical drilling set for shop work, install work, and punch-list jobs without digging through loose bits.
Overview
The Festool 577483 BKS D 1/8”-1/2” CE/W/7 7-Piece Brad Point Drill Bit Set is a wood and plastic drilling set built around Festool’s CENTROTEC interface for fast changes and better control. This is a brad point drill bit set designed for drilling clean holes in wood and plastic. Model Number: 577483. If you run Festool cordless drills and want a bit set that starts accurately, clears chips quickly, and keeps overall drill length shorter in tight spaces, this is the setup Festool had in mind.
What matters here is not just the seven-piece size range, but how the bits are built for cleaner boring work. Brad point geometry helps the bit start where you place it instead of skating across the surface. That is a big deal when you’re drilling visible holes in trim, cabinetry, shelving, furniture parts, or plastic components where blowout and wandering ruin the result. Festool also calls out rapid chip ejection, which helps the bit pull waste out of the hole more efficiently. Less packed debris means less friction, less heat buildup, and a better shot at keeping the cutting edges sharp longer.
The CENTROTEC shank is the feature that separates this set from a generic brad point kit. On compatible Festool drills using the WH-CE CENTROTEC chuck, the bits change quickly and hold with better stability and less runout. In practical terms, that means the bit tracks truer and the drill feels more compact in your hand. Festool states the CENTROTEC setup reduces overall drill length by nearly 1-1/2 inches and cuts about 1/2 pound compared to a standard keyless chuck arrangement. That extra clearance matters when you’re drilling inside cabinets, between framing members, or close to assembled parts.
There is also some flexibility built in. Even though these bits are made to shine in the CENTROTEC system, the shank can also be used in standard three-jaw chucks for no-slip performance. So if you are not using a Festool drill on every job, the set still has value beyond one tool. That makes it easier to keep one accurate wood-drilling set in rotation instead of separating your Festool accessories from the rest of your cordless lineup.
Festool uses precision-ground steel for this set, and that matters because a brad point bit only performs as well as its edge quality and consistency. Precision grinding supports cleaner hole geometry and longer service life when you’re drilling repeatedly in hardwood, softwood, plywood, or plastics. The corrosion-resistant finish is another small detail that pays off over time. It helps resist rust and also helps reduce pitch and resin buildup, which is exactly the kind of grime that turns a good wood bit into a frustrating one.
This set is best for users who care about accuracy, quick bit changes, and compact drill length more than bargain-bin pricing. It makes the most sense for Festool owners running compatible cordless drills like the T18, C18, TPC 18, CXS, TXS, and PDC 18, especially if they already use the CENTROTEC system day to day. It also works for anyone who wants a clean-cutting brad point drill bit set for woodworking or plastic drilling and likes the idea of running the same bits in a standard three-jaw chuck when needed.
Compact Drilling in Tight Spaces
If you drill inside cabinets, around hardware, or anywhere clearance is tight, bit length matters. The CENTROTEC design helps shorten the working setup so the drill feels easier to position and control.
- CENTROTEC shank reduces overall drill length by nearly 1-1/2 inches
- Festool states the system can reduce weight by about 1/2 pound compared to a standard chuck setup
Accurate Starts and Cleaner Holes
Brad point bits are the right choice when hole placement and edge quality matter. The tip starts where you mark it, and the flute design helps clear waste so the cut stays cleaner from entry to exit.
- Designed for drilling holes in wood and plastic
- Rapid chip ejection helps reduce friction and heat buildup that can dull bits early
Organized Sizes Ready to Grab
A bit set is only useful if the sizes you need are actually there and easy to identify. This one covers common small-to-medium drilling sizes in a dedicated case that keeps the set together.
- Seven-piece size range from 1/8 inch to 1/2 inch
- Includes a storage case for transport and organization
What’s in the Box
- (1) 1/8 in. Brad Point Drill Bit
- (1) 3/16 in. Brad Point Drill Bit
- (1) 1/4 in. Brad Point Drill Bit
- (1) 5/16 in. Brad Point Drill Bit
- (1) 3/8 in. Brad Point Drill Bit
- (1) 7/16 in. Brad Point Drill Bit
- (1) 1/2 in. Brad Point Drill Bit
- (1) Storage Case
Key Specifications
| Tool Type | Brad Point Drill Bit Set |
|---|---|
| Piece Count | 7 |
| Diameter Range | 1/8 in. to 1/2 in. (3.2 mm to 12.7 mm) |
| Shank Type | CENTROTEC |
| Material | Precision-ground steel |
| Finish | Corrosion-resistant |
| Application | Wood and plastic drilling |
| Weight | 0.8 lbs |
Compatibility
Festool CENTROTEC System Suitable for Festool cordless drills with the CENTROTEC interface and intended for use with the WH-CE CENTROTEC tool chuck. Compatible Festool Drills Festool lists compatibility with T18, C18, TPC 18, CXS, TXS, and PDC 18 drills. Standard Chuck Use The CENTROTEC shank can also be used in all three-jaw chucks for no-slip performance.
Built For
WoodworkingCarpentryWood DrillingPlastic DrillingClean Hole BoringTight-Space Drilling
Pro Tip
If you already run a Festool drill, use these in the WH-CE CENTROTEC chuck whenever clearance is tight. You will get the shortest setup, the fastest swaps, and the best reason to buy this set over a standard brad point kit.
Warranty & Support
No manufacturer’s warranty is listed for this item.
Tool Nut’s Take
Tool Nut’s Take
Festool 577483 BKS D 1/8”-1/2” CE/W/7 7-Piece Brad Point Drill Bit Set Makes More Sense If You Actually Use CENTROTEC
This is a clean, well-thought-out wood drilling set that earns its keep when you want accurate starts, quick changes, and a shorter drill setup.
- Who it’s for: Festool drill users, woodworkers, and carpenters who want cleaner holes in wood and plastic and already see the value in the CENTROTEC system.
- Why it stands out: The brad point geometry, chip-clearing flute design, and CENTROTEC shank work together to give you better control than a basic off-the-shelf bit pack.
- Worth knowing: If you are not using a compatible Festool setup, the bits still work in a three-jaw chuck, but the biggest advantage of this set is the compact CENTROTEC interface.
Common Questions
- What materials is this set designed to drill? It is designed for drilling holes in wood and plastic.
- Do these bits only work with Festool drills? No. They are made for Festool cordless drills with the CENTROTEC interface, but the shank can also be used in standard three-jaw chucks.
- What size range does the set cover? The included bits range from 1/8 inch to 1/2 inch, or 3.2 mm to 12.7 mm.
- Why would someone choose this over a standard brad point set? The main difference is the CENTROTEC shank, which supports faster changes, reduced runout, lower weight, and a shorter overall drill setup on compatible Festool tools.
Reviews
There are no reviews yet.