Key Features
Kickback ControlKickback is one of the biggest risks with a track saw. The integrated kickback stop reacts fast to help reduce that risk while also protecting the cut and the workpiece. Corded-Level PowerThe dual 18V battery setup and brushless EC-TEC motor give this cordless track saw the kind of cutting power you expect from a plug-in saw, without dragging a cord across sheet goods or a jobsite. Clean, Fast CutsWith a 6-1/4 inch blade, up to 2-1/8 inch cutting depth, and variable speed up to 5200 RPM, it is built to move through sheet goods, doors, and countertop work with less rework afterward.
Overview
The Festool 577677 TSC 55 K Cordless Track Saw 5.0Ah Kit with Kickback Stop is a cordless track saw kit built for precise plunge cuts, guided rip cuts, and clean finish work in wood sheet goods and jobsite panels. This is a track saw designed for accurate sheet cutting, trim fitting, and plunge-cut applications. Model Number 577677. If you need clean edges, strong cordless performance, and better control when cutting with a guide rail, this is the kind of saw that earns its keep fast.
What makes this saw matter on the job is the balance between mobility and cut quality. Festool pairs a brushless EC-TEC motor with a dual battery setup rated at 2 x 18V, so you get the cutting strength of a serious plunge saw without being tied to an outlet. The variable no-load speed range of 2650 to 3800 and 5200 RPM lets you tune the cut to the material instead of forcing one speed across everything. That matters when you are switching from cabinet-grade sheet goods to thicker stock and want to keep the edge clean.
The headline feature here is the kickback stop. On a track saw, kickback is not a small issue. Festool built this system to stop the blade quickly to help reduce the risk of injury during sawing and plunge cuts. That is a real-world feature, not brochure filler. It also helps protect the workpiece, which matters when you are cutting finished panels, interior doors, or expensive countertop material where one bad move can cost more than the blade.
Capacity is where the TSC 55 K stays useful across a wide range of work. It cuts up to 2-1/8 inches deep at 90 degrees and 1-11/16 inches at 45 degrees, with an angle range from -1 to 47 degrees. That gives you room for straight panel breakdown, bevel work, recess cuts, trimming doors to length, and expansion joints in flooring. The 6-1/4 inch blade size is a sweet spot here because it gives solid depth without turning the saw into a bulky top-heavy unit.
Festool also built this saw around visibility and finish quality. The sight window and blade-view markings help with plunge-cut start and stop points, which is especially useful when you are cutting openings in installed panels or making controlled recess cuts in doors and worktops. Add the splinter guard and guide rail system, and you are not just cutting fast, you are cutting in a way that reduces cleanup and edge touch-up.
Dust control is another reason this saw fits finish work and indoor remodeling. You can run it with the included dust bag for mobile cutting or connect it to an extractor. Festool also supports Bluetooth automatic switch-on with compatible extraction equipment, which is one of those features that sounds small until you use it all day. Better dust capture means cleaner lines, a cleaner workspace, and less mess in occupied homes or finished interiors.
As a system tool, this saw is meant to work with Festool guide rails, splinter guards, angle stops, saw tables, and extraction accessories. That is important because a good track saw is not just about the saw body. It is about repeatable accuracy. If you already work in the Festool ecosystem, the value goes up. If you are buying into a guided cutting system for the first time, this kit gives you the core saw, batteries, charger, blade, and storage to get moving right away.
Who should buy it? Cabinet installers, remodelers, finish carpenters, flooring pros, and serious woodworkers who need track-saw accuracy without a cord. It also makes sense for contractors breaking down sheet goods on site instead of dragging full panels to a table saw. If your work depends on straight cuts, clean edges, and portability, this is one of the cordless track saw kits that actually solves those problems in a practical way.
At a Glance
2 x 18VBattery System2-1/8 in.Max Cutting Depth5200 RPMTop No-Load Speed7.94 lbsTool Weight
Guide-Rail Accuracy for Finish Work
This saw is built for the kind of work where straight lines and clean edges are the whole job. Paired with a guide rail, it gives you controlled cuts on large stock without wrestling full sheets onto a table saw.
- Designed for precise cuts in materials up to 2-1/8 inches thick
- Useful for trimming interior doors, sizing chipboard, and cutting recesses in worktops
Full Power Without the Cord
When you are working on a roof, in a remodel, or anywhere power is awkward, cordless matters. The TSC 55 K is built to keep the mobility advantage without feeling like a light-duty compromise.
- Brushless EC-TEC motor and dual 18V battery setup deliver strong cutting performance
- Variable speed from 2650 to 3800 and 5200 RPM helps match blade speed to the material
Safety Feature You Will Actually Appreciate
The kickback stop is the feature that separates this saw from a lot of the field. It is built to react fast during sawing and plunge cuts, which adds confidence when you are working on finished material or awkward setups.
- Kickback stop helps reduce the risk of injury from kickback
- Can be deactivated for specific individual cuts, then reactivates the next time the saw is switched on
What’s in the Box
- (1) Festool TSC 55 K cordless track saw
- (2) BP 18 Li 5.0 ASI battery packs
- (1) TCL 6 rapid charger
- (1) HW 160×1.8×20 WD42 fine tooth saw blade
- (1) Splinter guard
- (1) Sight window
- (1) SB-TSC dust bag
- (1) 5 mm hex key
- (1) Systainer3 SYS3 M 437
Key Specifications
| Voltage | 2 x 18 V |
|---|---|
| Battery Capacity | 5.0 Ah |
| No-Load Speed | 2650 – 3800 / 5200 RPM |
| Blade Diameter | 6-1/4 in. (160 mm) |
| Cutting Depth at 90° | 0 – 2-1/8 in. (0 – 55 mm) |
| Cutting Depth at 45° | 1-11/16 in. (43 mm) |
| Bevel Range | -1° to 47° |
| Weight | 7.94 lbs (3.6 kg) |
Compatibility
Battery Platform Uses Festool 18V battery packs in a dual-battery 2 x 18V setup. Dust Extraction System Works with Festool extractors and supports Bluetooth automatic switch-on with compatible extraction equipment. Sawing System Designed to work within the Festool guide rail and accessory system, including splinter guards, angle stops, and saw tables.
Built For
Finish CarpentryCabinet InstallationRemodelingWoodworkingInterior Door TrimmingCountertop CutoutsSheet Goods BreakdownFlooring Expansion Joints
Pro Tip
If you are making a one-off cut on uneven material without a guide rail, you can manually switch off the kickback stop for that cut. Nice part is the saw automatically reactivates the kickback stop the next time you power it on, so you are not likely to forget it.
Warranty & Support
3 Years Limited warranty.
Tool Nut’s Take
Tool Nut’s Take
Why the Festool 577677 TSC 55 K Cordless Track Saw 5.0Ah Kit with Kickback Stop earns its price
This is the kind of cordless track saw that makes sense the second you need clean, controlled cuts away from a table saw or extension cord.
- Who it’s for: Pros and serious woodworkers who cut sheet goods, trim doors, fit counters, or need accurate plunge cuts on site.
- Why it stands out: The kickback stop is the real separator here, and the dual 18V setup gives you the power to back it up instead of leaving you with a safety feature on a weak saw.
- Worth knowing: This is a system-minded tool. It gets even better when you use it with Festool guide rails and extraction, so it is best for buyers who care about repeatable accuracy more than bargain-bin pricing.
Common Questions
- What kind of saw is this? This is a cordless track saw designed for plunge cuts, guided straight cuts, bevel cuts, and clean sheet-good breakdown.
- What is the maximum cutting depth? It cuts up to 2-1/8 inches at 90 degrees and 1-11/16 inches at 45 degrees.
- Does it support dust extraction? Yes. It can be used with the included dust bag or with a compatible extractor, and it supports Bluetooth automatic switch-on with compatible Festool extraction equipment.
- Can the kickback stop be turned off? Yes. Festool states the kickback stop can be manually deactivated for individual cuts and is automatically reactivated the next time the saw is switched on.
Reviews
There are no reviews yet.