Key Features
Dust Bag ConversionLets compatible Festool track saws work with the newer Festool dust bag setup, giving you a cleaner option when a hose is not practical. Made for Festool Track SawsBuilt for the Festool TS 55 REQ, TS 55 EQ, and TS 75 EQ. That means a proper fit for the saws this part was designed around. Dual Use PortThis replacement port works with the Festool dust bag connector and also with standard Festool dust extraction hoses, so you keep flexibility on the job.
Overview
The Festool Replacement Track Saw Dust Port for use with Dust Bag, model 202096, is a saw accessory for select Festool track saws. This is a track saw dust port designed for dust collection conversion on compatible saws. If you want to run a Festool dust bag on a saw that originally used a different port setup, this is the part that makes that change possible.
This Festool replacement dust port is made for the TS 55 REQ, TS 55 EQ, and TS 75 EQ. In practical terms, it gives owners of those saws a way to use the newer Festool dust bag without replacing the saw. That matters when you are working in a finished space, on install work, or anywhere dragging a hose around is more of a hassle than a help.
Festool also designed this port so it will work with standard Festool dust extraction hoses. That gives the part more value than a one-purpose conversion piece. You can set the saw up for bag-based dust collection when portability matters, then switch back to hose extraction when you want maximum chip capture at the vac.
Installation is straightforward in concept but not a surface-level swap. Festool notes that you will need to remove the blade housing from the saw and replace the original dust port with this one. The fitting is keyed, so orientation matters during installation and you may need to rotate the port to seat it properly. That is useful to know ahead of time because this is not just a snap-on add-on.
At roughly 0.1 lb, this is a small replacement part, but it solves a specific compatibility problem for users trying to modernize dust collection on an existing Festool track saw. It is a better fit for owners who already know their saw model and want a clean, factory-style way to add dust bag capability instead of improvising an adapter.
If you run a Festool track saw for finish carpentry, cabinet installation, remodeling, or punch-list work, this accessory makes the most sense when mobility and quick setup are priorities. It is especially useful for users who already own or plan to buy the Festool dust bag and want their TS 55 REQ, TS 55 EQ, or TS 75 EQ to work with it correctly.
Upgrade Dust Collection Flexibility
This part is for users who need their track saw to work with a Festool dust bag without giving up the option to use standard dust extraction hoses. It is a small part, but it changes how the saw fits into real jobsite and install work.
- Compatible with Festool TS 55 REQ, TS 55 EQ, and TS 75 EQ
- Works with the Festool dust bag connector and standard Festool extraction hoses
Key Specifications
| Product Type | Saw Accessory |
|---|---|
| Model Number | 202096 |
| Weight (lbs) | 0.1 lb |
| Primary Function | Dust port replacement for dust bag and hose compatibility |
Compatibility
Saw Models Fits Festool TS 55 REQ, TS 55 EQ, and TS 75 EQ track saws. Dust Collection Options Works with the Festool dust bag connector and with standard Festool dust extraction hoses.
Built For
Finish CarpentryCabinet InstallationRemodelingInterior Cut WorkPortable Dust Collection
Pro Tip
Before tearing into the saw, verify your exact model and have the saw fully powered down. Since the fitting is keyed, do a quick dry check on orientation during install so you do not fight the port when you reassemble the blade housing.
Tool Nut’s Take
Tool Nut’s Take
Festool Replacement Track Saw Dust Port for use with Dust Bag Solves a Specific Problem the Right Way
If you own one of the compatible Festool saws and want to run a dust bag cleanly, this is the correct way to do it instead of cobbling together a workaround.
- Who it’s for: Festool TS 55 REQ, TS 55 EQ, and TS 75 EQ owners who want dust bag capability or flexible dust collection options.
- Why it stands out: It is purpose-built for select Festool track saws and works with both the newer dust bag setup and standard Festool extraction hoses.
- Worth knowing: This is a replacement part, not a quick external add-on. You need to remove the blade housing to install it, so it is best for users comfortable with a parts swap.
Common Questions
- Which saws is this dust port made for? It is listed for the Festool TS 55 REQ, TS 55 EQ, and TS 75 EQ track saws.
- Can this only be used with a dust bag? No. This replacement dust port also works with standard Festool dust extraction hoses.
- Is installation just an external snap-on change? No. Festool states that you need to remove the blade housing and swap the original dust port with this one.
Reviews
There are no reviews yet.