About this item
- Replacement For – OE Number:23209-46090/842-12268; suitable for Lexus GS300 Base Sedan 4-Door 3.0L 1998-2005; for Lexus IS300 Base Sedan 4-Door 3.0L 2001-2005; for Lexus IS300 Sportcross Wagon 4-Door 3.0L 2002-2005; for Lexus SC300 Base Coupe 2-Door 3.0L 1998-2000; for Toyota for Supra Base Hatchback 2-Door 3.0L 1998; for Toyota 3.0L 2JZ-GE motor.
- Function – High-efficient fuel sprays and High Impedance Coils enable fast start-up in cold environments, low fuel consumption, and better performance.
- Material – Durable effective rubber O-Ring that can seal fuel vapors in and keep them from leaking.
- Installation – Professional installation is highly recommended: Fuel injectors directly affect the air/fuel ratio for the engine and new fuel injectors do require a new or updated tune. We also suggest that you check the other component of the engine before installation.
- Package List – 6 Pcs Fuel Injector
Features:
- Direct replacement of your old injector and no modification needed.
- Durable effective O-Ring that can seal fuel vapors in and keep them from leaking.
- High efficient fuel sprays and High Impedance Coil for good performance.
OE Number:
- 23209-46090/842-12268
Details:
- O-Rings Included: Yes, preinstalled
- Orifice Type: 4 Holes Disc
- Material: Metal, Plastic
- Voltage: DC 12V
- Flow Rate: Flow Rate at 43.5psi/3 bar, 23.8Lb/hr, 179.8G/min, 250cc/min
- Pin Number: 2 Pins
Fitment:
- for Lexus GS300 Base Sedan 4-Door 3.0L 1998-2005
- for Lexus IS300 Base Sedan 4-Door 3.0L 2001-2005
- for Lexus IS300 Sportcross Wagon 4-Door 3.0L 2002-2005
- for Lexus SC300 Base Coupe 2-Door 3.0L 1998-2000
- for Toyota for Supra Base Hatchback 2-Door 3.0L 1998
- for Toyota 3.0L 2JZ-GE motor
Please Note:
- Please ensure this part is suitable for your vehicle before purchasing.
- This is a non-OEM product, accessory only!
Package List:
- 6 pcs Fuel injector
Installation:
- Step 1. Make sure the engine is cool down. Disconnect the battery.
- Step 2. Remove the bolts and brackets from the fuel rail.
- Step 3. Disconnect the plug on each injector.
- Step 4. Lift the fuel rail and remove the injector from the fuel rail.
- Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
- Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
- Step 7. Double check for fuel leaks before and after starting the engine.
Reviews
There are no reviews yet.