G 1/2” Male x 18L Zinc plated Steel 90 deg Elbow Swivel Joint 315 Bar DIN 2353

This angle swivel joint is designed with female threads and a cutting ring connection. Connection 1 has male G 1/2 inch threads. Connection 2 is a 18 mm cutting ring. It comes with a gasket to ensure a proper seal can be made. It is an elbow fitting. It is made out of steel and is galvanic/electrolytic zinc plated for surface protection. It has a NBR seal. It is suitable for media within a temperature range of -20 °C to 100 °C (-4 °F to 212 °F). At 20 °C (68 °F), it can handle a maximum pressure of 315 bar (4569 psi). The input and the output are at a 90° angle. It can withstand 1 rotations per minute. According to the DIN 2353, it has an L (light) load class. It is made in accordance with the DIN EN ISO 8434-1 (DIN 2353). They have a 3-part design.

Cons:

• Since it has a cutting ring connection, it can only be used once

FL2E-MC-R series

The FL2E-MC-R series are elbow fittings with male threads and then either a compression ring or cutting ring connection point. They are rotatable between 0.5 to 10 rotations per minute. They are bent at 90 degrees and made out of steel or stainless steel.

Specifications

Thread : 1/2 inch
Thread (smaller) : 1/2 inch
Load class (DIN 2353) : L (light)
Cutting ring connection (mm) : 18
Connection type : Outer thread cylindrical BSPP-G
Material : Steel
Seal material : NBR (nitrile rubber)
Min pressure (bar) : 0
Min pressure difference (bar) : 0
Max pressure at 20 °C (bar) : 315
Min temperature (°C) : -20
Max temperature (°C) : 100
Standard : DIN EN ISO 8434-1 (DIN 2353)
Fitting features : With gasket
Model : 3-part
Max. number of revolutions (Rpm) : 1
Bend angle (°) : 90
Material connection 1 : Steel
Material connection 2 : Steel
Shape : Elbow
Surface protection connection 1 : Galvanic/electrolytic zinc plated
Surface protection connection 2 : Galvanic/electrolytic zinc plated
With drain : No