Icon Process Controls BRPV-003 BRP Series Back Pressure Regulator and Relief Valve, 1/4 to 3/8″, PVC

The 1/4″ – 3/8″ PVC BRP Series Back Pressure/Relief Valve features a true union design with a 5-150 psi pressure range, Teflon-bonded EPDM diaphragm, and Viton seals. The valve can function as both a back pressure valve or a pressure relief valve. It has GFPP upper components and socket end connections.

Icon Process Controls BRPV-003 Offers

The Truflo BRP Series Back Pressure/Relief Valve has two functions. As a back pressure valve installed in-line downstream of a pump. In this position the back pressure below the metering pump is maintained. When the PRB valve is installed in the branch of a tee fitting it functions as a pressure relief valve. The valve remains closed until inlet pressure reaches the preset pressure which is adjusted by turning the spring tensioning bolt. The pressure at the inlet of the valve acts upward against the piston allowing the liquid under higher pressure to flow upwards through the orifice.

What’s included with the Icon Process Controls BRPV-003

• Icon Process Controls BRPV-003 BRP Series Back Pressure Regulator and Relief Valve, 1/4 to 3/8″, PVC