Key Features
Accurate hinge layout Indexing tabs and adjustable cams help place the hinge cup hole consistently, so doors sit right and operate smoothly. Drill press style results A drill guide and stop collar control the bit, helping you drill straight and to a repeatable depth using a standard hand drill. Jobsite tough build Glass-filled nylon keeps the jig light in the hand but durable enough for repeated door installs and cabinet runs.
Overview
The Kreg Tool KHI-HINGE Concealed Hinge Jig (Model KHI-HINGE) is a drilling jig designed for drilling concealed cabinet door hinge cup holes with a hand drill. If you install cabinet doors and want the hinge cups to land in the same spot every time, this jig takes the measuring and guesswork out of it.
Concealed hinges (often called Euro hinges) work great because they are adjustable and hidden when the door is closed, but they demand a large cup hole drilled at a very specific position and depth. The Kreg jig uses built-in indexing tabs, measuring scales, and adjustable cams to dial in the hinge offset based on your hinge instructions, then guides the bit so each door matches the last one.
For drilling, the jig uses a drill guide and a depth stop collar to help keep the hole straight and control cup depth. That is the difference between doors that close clean and doors that bind or sit proud because the cup depth wandered. A carbide-tipped drill bit is included for reliable cutting when you are doing multiple doors.
The base is made from glass-filled nylon, which is a practical choice for a jig like this: it is rigid enough to hold alignment but light enough to move from door to door without feeling clunky. Built-in measuring scales support repeatable placement when you are matching hinges across a kitchen or a run of built-ins.
This jig is intended to be simple for first-timers but consistent enough for pros. Set the cams for your hinge offset, register the jig using the indexing features, and drill the cup holes with a standard drill. It also provides guide holes for drilling hinge screw holes, but you will need to supply the proper small bit for that step.
If you are a cabinet installer, remodeler, trim carpenter, or DIYer building doors, the KHI-HINGE is for you. It is a straightforward way to get clean, repeatable concealed hinge cup holes without dragging out a drill press.
Repeatable Hinge Placement
When every door needs the same hinge location, the jig gives you a consistent reference so you can drill, hang, and adjust doors without fighting alignment issues.
- Built-in indexing tabs help position the jig consistently on the door
- Adjustable cams set the correct hinge offset based on your hinge requirements
Controlled Drilling With a Hand Drill
You do not need a drill press to get clean hinge cups. The guide and stop collar keep the bit doing what it is supposed to do: straight in, to the right depth, every time.
- Drill guide supports accurate drilling for hinge cup holes
- Stop collar helps make cup depth consistent from door to door
Fast Setup for Cabinet Runs
Once you have your hinge location figured out, the built-in measuring scales help you repeat it across a full set of doors without constantly reaching for a tape.
- Built-in measuring scales support repeatable layout
- Designed for drilling concealed hinge cup holes on cabinet doors
Key Specifications
| Model | KHI-HINGE |
|---|---|
| Tool Type | Concealed hinge drilling jig |
| Material | Nylon (glass-filled nylon base) |
| Stock Thickness Range | 0.5 in to 1.5 in |
| Product Length | 8.3 in |
| Product Width | 8 in |
| Weight | 0.75 lb |
| Pieces | 1 |
Compatibility
Drills Designed to be used with an ordinary hand drill (no special tools required). Hinges For concealed cabinet door hinges (Euro-style concealed hinges). Drill Bits A 1/16 in bit is required to drill for hinge-mounting screws (not included).
Built For
Cabinet door installation Kitchen and bath remodeling Cabinetmaking Woodworking Finish carpentry DIY cabinet projects
Pro Tip
Before you drill your first door, set the stop collar and drill one cup hole in a scrap piece of the same thickness. Test-fit the hinge cup, then lock in your settings and run the rest of the doors.
Warranty & Support
Warranty: None.
Tool Nut’s Take
Tool Nut’s Take
Kreg Tool KHI-HINGE Concealed Hinge Jig: the clean way to drill hinge cups without a drill press
When you want cabinet doors to hang right the first time, this jig gives you repeatable placement and controlled drilling with the drill you already own.
- Who it’s for: Anyone installing concealed cabinet hinges, from a one-off vanity door to a full kitchen.
- Why it stands out: Indexing plus adjustable cams for offset, and a guided bit with a stop collar for consistent depth.
- Worth knowing: You will need a 1/16 in bit for hinge-mounting screw holes, and it is not included.
Common Questions
- Do I need a drill press? No. This jig is designed to deliver drill press accuracy using a standard hand drill.
- What hinge type is it for? It is designed for concealed cabinet door hinges (Euro-style concealed hinges).
- Does it include the drilling bit? Yes, a carbide-tipped drill bit is included, but a 1/16 in bit for hinge-mounting screws is required and not included.
Reviews
There are no reviews yet.