Key Features
C4 Carbide EdgeThe carbide tipped tooth design is built for hardwoods and exotic species where ordinary blades give up fast. It also gives this blade the ability to be resharpened 4 to 5 times, which matters if you resaw often. Smoother Resaw CutsThe 2-3 variable teeth per inch pattern helps reduce vibration while leaving a cleaner surface behind. That means less cleanup after the cut and more usable stock off the saw. Thin Kerf EfficiencyWith a .044 inch kerf and .024 inch backing, this Laguna band saw blade is built to waste less material during resawing. If you are slicing expensive lumber into veneers or thinner boards, that thinner cut adds up.
Overview
The Laguna BBRK-12-115 ResawKing 1/2″ X 2-3 Variable TPI X 115″ is a premium band saw blade built for serious resawing work in hardwoods and exotic woods. This is a band saw blade designed for smooth, efficient resawing with minimal material loss. Model BBRK-12-115 uses a 1/2 inch blade width, a 115 inch blade length, and a 2-3 variable teeth per inch pattern for woodworkers who want cleaner surfaces right off the saw.
What makes this blade matter is not just that it cuts, but how it cuts. The variable tooth spacing is there to reduce vibration during the cut, which helps the blade track more smoothly and leaves a better finish on the workpiece. When you are resawing figured hardwood, expensive exotics, or shop-made veneer stock, a smoother finish means less sanding and less wasted time.
The tooth material is a big part of the story. Laguna lists this blade as using C4 carbide tipped alloy, which is why the ResawKing has become a go-to option for woodworkers pushing beyond basic band saw work. Carbide holds an edge longer than standard steel in demanding hardwood applications, and this blade can be resharpened 4 to 5 times. For a shop that resaws regularly, that makes it more of a long-term cutting tool than a disposable accessory.
The blade geometry also helps keep yield high. The stated .044 inch kerf and .024 inch backing are aimed at reducing wood waste while still supporting a stable cut. That matters when every fraction of an inch counts, especially with costly lumber where a thinner kerf can mean an extra slice from the same board.
Laguna positions this blade specifically for hardwoods and exotics, and the product data backs that up. This is not a general-purpose rough cut blade meant for construction lumber or demolition work. It is a specialized woodworking band saw blade for users who care about cut quality, low waste, and repeatable resaw results.
If you run a band saw set up for a 115 inch x 1/2 inch blade and spend time resawing boards, bookmatching panels, or slicing your own veneers, this blade makes sense. It is best suited for furniture makers, cabinet shops, custom woodworking, and serious hobbyists who want better finish quality and longer service life from a resaw blade.
Built to Leave a Cleaner Surface
The tooth pattern is the part you pay for here. This blade is made for smooth resaw cuts where finish quality matters, not just fast stock removal.
- 2-3 variable teeth per inch helps reduce vibration during the cut
- C4 carbide tipped teeth are built for hardwood and exotic wood applications
Made for Repeated Shop Use
This is the kind of blade you buy when resawing is a regular part of the workflow. The resharpenable carbide design gives it a longer life cycle than standard blades.
- Can be resharpened 4 to 5 times according to product data
- Ultra-thin kerf is designed to reduce material waste on expensive stock
Key Specifications
| Tool Type | Band Saw Blade |
|---|---|
| Blade Width | 1/2 in |
| Blade Length | 115 in |
| Teeth Per Inch | 2-3 Variable TPI |
| Tooth Material | C4 Carbide Tipped Alloy |
| Backing Thickness | .024 in (0.6 mm) |
| Kerf | .044 in (1.1 mm) |
| Weight | 0.9 lb |
Compatibility
Band Saw Fitment Fits band saw setups that require a 115 inch long blade. Blade Size Built as a 1/2 inch wide resaw blade with a 2-3 variable TPI tooth pattern.
Built For
WoodworkingResawingHardwood CuttingExotic Wood CuttingCabinet ShopsFurniture MakingVeneer WorkSerious DIY / Hobbyist
Pro Tip
A blade like this pays off most when your band saw is tuned for resaw work. Set it up with proper tension and a dialed-in fence so you actually get the smooth finish and low waste this thin-kerf carbide blade is built to deliver.
Tool Nut’s Take
Tool Nut’s Take
Laguna BBRK-12-115 ResawKing 1/2″ X 2-3 Variable TPI X 115″ is for woodworkers who care what the cut looks like
This is a purpose-built resaw blade for shops that work with better lumber and do not want to waste it.
- Who it’s for: Woodworkers, cabinet makers, furniture builders, and serious hobbyists doing regular resawing in hardwood or exotic stock.
- Why it stands out: C4 carbide tipped teeth, resharpenable construction, variable tooth spacing, and a thin kerf all point to one thing: cleaner cuts with less waste.
- Worth knowing: This is not a cheap general-purpose blade, and it is not trying to be. It makes the most sense when your saw is set up correctly and resaw quality actually matters to the job.
Common Questions
- What kind of tool is this? It is a band saw blade designed specifically for resawing hardwoods and exotic woods.
- Can this blade be resharpened? Yes. Laguna states that the ResawKing can be resharpened 4 to 5 times.
- What is the tooth pattern? This blade uses a 2-3 variable TPI pattern with pitches listed as 12 mm, 14 mm, and 16 mm.
- What size band saw does it fit? It is built for band saws that use a 115 inch long blade, and the blade width is 1/2 inch.
Reviews
There are no reviews yet.