Key Features
C4 Carbide EdgeThe C4 carbide tipped tooth design is built for demanding resaw work in hardwoods and exotic species. It stays useful longer than a standard steel blade and helps deliver cleaner cuts with less cleanup after the pass. Smoother ResawingVariable tooth spacing and a triple var-tooth design help cut down vibration and harmonics. That matters when you are trying to get straight, smooth veneer cuts without fighting the blade. Laguna Band Saw BladeThe Laguna BBRK-34-115 ResawKing 3/4″ x 115″ is made for woodworkers who care about cut quality and material yield. Its thin kerf helps reduce waste, which is a real advantage when you are slicing expensive stock.
Overview
The Laguna BBRK-34-115 ResawKing 3/4″ x 115″ is a premium carbide-tipped band saw blade built for serious resawing work. This is a band saw blade designed for resawing hardwoods, exotic lumber, and veneer stock. Model Number BBRK-34-115. If you are trying to get ultra-smooth cuts with minimal waste, this blade is aimed directly at that job.
What sets this blade apart is the combination of C4 carbide tipped teeth, a thin kerf, and variable tooth spacing. In practical terms, that means you get a cleaner surface off the saw and throw less expensive material into the scrap pile. Tool Nut and Acme product data both point to the same core benefit: smooth, wafer-thin veneer cuts with very little sanding needed after the cut.
The tooth design is not just there for the spec sheet. Laguna calls out a triple var-tooth layout that helps reduce vibration and lower harmonics while cutting. For a woodworker, that matters because chatter and vibration show up fast in resaw work, especially when you are trying to slice consistent stock from figured hardwoods or exotics. A smoother-running blade makes it easier to stay on line and get a better finish right off the machine.
The blade uses a .024 inch backing and a .044 inch kerf according to the supplementary product data. That thinner cutting path helps reduce material loss, which is one of the big reasons resaw blades like this earn their keep. When you are working with costly lumber, saving even a little wood on every pass adds up fast.
Another real advantage is service life. The ResawKing blade is resharpenable, with Tool Nut data stating it can be resharpened 4 to 5 times. That gives this blade a longer working life than a standard disposable blade and makes it a more practical choice for shops that resaw regularly instead of occasionally.
The Laguna BBRK-34-115 ResawKing 3/4″ x 115″ is manufactured in Germany, with teeth individually brazed and ground using diamond wheels according to the product description. That kind of manufacturing detail matters on a blade like this because consistency from tooth to tooth is what helps it track well and leave a better finish across the width of the board.
This blade is best for woodworkers, cabinet shops, furniture makers, and serious hobbyists who want a high-end bandsaw blade for veneer cutting, bookmatching, and clean resawing in hardwood. If your priority is the lowest upfront blade cost, this is probably more blade than you need. If your priority is cleaner cuts, less sanding, less waste, and the ability to resharpen, this is exactly the kind of blade you look at.
Built to Leave a Cleaner Cut
This blade is aimed at one job above all else: getting better resaw results with less waste and less cleanup. If you work with hardwood or exotic stock, that is the difference between a blade that only cuts and a blade that actually improves the job.
- C4 carbide tipped tooth design for demanding resaw applications
- Variable tooth spacing helps reduce vibration during the cut
- Thin .044 inch kerf helps conserve material on expensive lumber
What’s in the Box
- (1) Laguna Resaw King Bandsaw Blade 3/4 in. x 115 in.
Key Specifications
| Blade Length | 115 in. |
|---|---|
| Blade Width | 3/4 in. |
| Blade Material | C4 carbide tipped alloy |
| Backing Thickness | .024 in. / 0.6 mm |
| Kerf | .044 in. / 1.1 mm |
| Teeth Per Inch | 2-3 variable |
| Pitch | 12 mm, 14 mm, 16 mm |
| Made In | Germany |
Built For
Woodworking Cabinet Shops Furniture Making Hardwood Resawing Exotic Lumber Veneer Cutting Bookmatching DIY / Hobbyist
Warranty & Support
Lifetime warranty against manufacturer’s defects.
Tool Nut’s Take
Tool Nut’s Take
Laguna BBRK-34-115 ResawKing 3/4″ x 115″ for woodworkers who care about yield
This is the kind of band saw blade you buy when cut quality and material savings matter more than bargain-bin blade pricing.
- Who it’s for: Woodworkers, furniture builders, and serious hobbyists doing regular resawing in hardwood, figured stock, or veneer work.
- Why it stands out: C4 carbide teeth, a thin kerf, reduced vibration, and the ability to resharpen give it real long-term value in a shop that uses it the way it was intended.
- Worth knowing: This is a specialty resaw blade, not a general-purpose bandsaw blade. It makes the most sense when your machine setup is dialed in and your goal is the cleanest possible resaw cut.
Common Questions
- Is this a standard steel blade? No. It uses C4 carbide tipped teeth.
- Can this blade be resharpened? Yes. Supplementary product data states it can be resharpened 4 to 5 times.
- What kind of work is this blade designed for? It is designed for resawing hardwoods, exotic lumber, and cutting smooth veneer stock with minimal waste.
- Where is it made? Germany.
Reviews
There are no reviews yet.