Key Features
Serious Breakaway TorqueUp to 1,200 ft-lbs of fastening torque and 1,600 ft-lbs of nut-busting torque gives this impact wrench the muscle for stubborn lug nuts, structural fasteners, and rusted hardware. Compact for the ClassAt 7.6 inches long, the Milwaukee 2967-21F 1/2 inch high torque impact wrench gives you better access where full-size high torque tools usually get awkward. Better Control on Removal4-Mode DRIVE CONTROL with auto shut-off and bolt removal mode helps you hit hard when needed, then slow down to keep fasteners from dropping or getting over-tightened.
Overview
The Milwaukee 2967-21F M18 FUEL 1/2 inch High Torque Impact Wrench with Friction Ring REDLITHIUM FORGE Kit is a cordless high torque impact wrench built for heavy-duty fastening and fastener removal. This is a high torque impact wrench designed for removing stubborn bolts and driving large fasteners in automotive, construction, and shop work. Model Number 2967-21F. If you need real cordless power without stepping up to a bulkier platform, this kit is aimed squarely at that job.
The headline numbers matter here because they directly change what you can get done. With up to 1,200 ft-lbs of fastening torque and 1,600 ft-lbs of nut-busting torque, this tool is built for seized hardware, large anchors, lug nuts, suspension work, and structural connections where a mid-torque tool starts running out of steam. Milwaukee also rates it for fast removal speeds, which means less time leaning on the trigger waiting for rusted fasteners to finally give up.
Size is a big part of why this model stands out. At 7.6 inches long, the Milwaukee 2967-21F M18 FUEL 1/2 inch High Torque Impact Wrench is short for a tool in this power class, so it fits better between framing members, around wheel wells, and in mechanical spaces where longer high torque impact wrenches can be frustrating. That compact body is the whole point here. You are getting heavy-hitting output without carrying a long, nose-heavy tool every time the job gets tight.
The 1/2 inch friction ring anvil is the right setup for users who swap sockets often. In real use, that means quicker changes during tire work, equipment service, and repetitive fastening jobs where you are bouncing between socket sizes. Milwaukee pairs that with a POWERSTATE brushless motor, which is there for output and durability under repeated heavy-load use, not just for a spec sheet.
Control is better than you usually get on a tool with this much power. The 4-Mode DRIVE CONTROL system gives you multiple speed and impact settings so you are not using full force for every task. Mode 4 adds two practical features that matter on the job. AUTO-SHUTOFF control limits fastening torque to no more than 50 ft-lbs for hand-tight applications, and Bolt Removal Control hits the fastener hard to break it loose, then drops speed to 750 RPM to keep nuts and bolts from flying off and disappearing under the truck or across the shop floor.
Jobsite visibility and tool durability also got real attention. Tri-LED lighting surrounds the anvil to throw light where the socket actually meets the fastener, which helps in engine bays, under vehicles, and in dim mechanical rooms. Milwaukee also calls out a battery isolation system that secures the pack connection and helps control vibration transmitted to the battery. That matters on a high-output impact wrench because repeated vibration can beat up both the connection and the pack over time.
This kit runs on the Milwaukee M18 battery platform and is compatible with all M18 batteries and chargers, which is a major plus for anyone already in the system. The included REDLITHIUM FORGE battery is part of Milwaukee’s higher-output lineup, giving this impact wrench the battery support needed to deliver its top-end performance. The kit also includes an M18 and M12 Rapid Charger and a contractor bag, so this is not a bare tool situation.
Who should buy it? If you work on vehicles, service heavy equipment, install large fasteners, or need a cordless impact wrench that can replace a lot of what used to require an air hose, this is the kind of tool that earns its keep fast. It is probably more tool than a light-duty homeowner needs, but for serious DIYers, mechanics, fleet techs, and contractors who routinely deal with stuck or oversized fasteners, it makes a strong case as the grab-it-first high torque impact wrench.
Ready to Work Out of the Bag
This kit gives you the full working setup, not just the tool. That matters if you want high torque performance on day one without piecing the system together afterward.
- Includes the impact wrench, FORGE battery, rapid charger, and contractor bag
- Built on the Milwaukee M18 platform for shared battery and charger compatibility
What’s in the Box
- (1) M18 FUEL 1/2 inch High Torque Impact Wrench with Friction Ring (2967-20)
- (1) M18 REDLITHIUM FORGE XC8.0 Battery Pack (48-11-1881)
- (1) M18 and M12 Rapid Charger (48-59-1808)
- (1) Contractor Bag
Key Specifications
| Battery System | M18 |
|---|---|
| Motor Type | POWERSTATE Brushless |
| Anvil Size | 1/2 in |
| Anvil Type | Friction Ring |
| Fastening Torque | 1,200 ft-lbs |
| Nut-Busting Torque | 1,600 ft-lbs |
| No-Load Speed | 0 – 2,000 RPM |
| Impacts per Minute | 0 – 2,400 IPM |
| Length | 7.6 in |
| Weight Excluding Battery | 5.9 lb |
| ONE-KEY Enabled | No |
| Made In | Viet Nam |
Compatibility
Battery PlatformCompatible with all Milwaukee M18 batteries. ChargersWorks with Milwaukee M18 chargers. This kit includes an M18 and M12 Rapid Charger. Socket InterfaceUses a 1/2 inch square anvil with friction ring for quick socket changes.
Built For
Automotive Equipment Maintenance Construction General Contracting Heavy Fastener Removal Shop Work
Pro Tip
Use Mode 4 when you are pulling rusted hardware overhead or inside tight engine bays. It breaks the fastener loose at full output, then drops speed so the nut does not spin off and disappear where you cannot reach it.
Warranty & Support
5 Year tool warranty and 3 Year battery warranty.
Tool Nut’s Take
Tool Nut’s Take
Milwaukee 2967-21F High Torque Done Right
The Milwaukee 2967-21F M18 FUEL 1/2 inch High Torque Impact Wrench with Friction Ring REDLITHIUM FORGE Kit hits that sweet spot of real high-torque power, compact length, and useful control features.
- Who it’s for: Mechanics, fleet techs, equipment service crews, and contractors who regularly deal with seized or oversized fasteners.
- Why it stands out: You are getting 1,600 ft-lbs of breakaway torque in a 7.6 inch body, plus a friction ring anvil and a control mode that actually helps on removal.
- Worth knowing: This is a serious high torque impact wrench, not a light-duty shop toy. Also, it is not ONE-KEY enabled, so if tracking and digital setup matter to you, keep that in mind.
Common Questions
- Is this a bare tool or a full kit? It is a full kit that includes the impact wrench, one REDLITHIUM FORGE battery, a rapid charger, and a contractor bag.
- What battery platform does it use? It runs on the Milwaukee M18 system and is compatible with all M18 batteries and chargers.
- Does it use a detent pin or friction ring anvil? This model uses a 1/2 inch friction ring anvil for faster socket changes.
- Is ONE-KEY included? No. Official product data lists this model as not ONE-KEY enabled.
Reviews
There are no reviews yet.