Key Features
Serious Torque OutputUp to 1,100 ft-lbs of fastening torque and 1,500 ft-lbs of nut-busting torque gives this impact wrench the muscle for stubborn fasteners, heavy equipment work, and truck lug nuts. Compact for the ClassAt 7.6 inches long, the Milwaukee 2967-22 M18 FUEL 18V 1/2″ High Torque Impact Wrench Friction Ring Kit reaches into tighter engine bays, suspension work, and cramped steel connections without giving up high torque. Control That Helps4-Mode DRIVE CONTROL, auto shut-off, and bolt-removal mode let you back off from full power when the job calls for finesse, not brute force.
Overview
The Milwaukee 2967-22 M18 FUEL 18V 1/2″ High Torque Impact Wrench Friction Ring Kit is a cordless 1/2 inch high torque impact wrench built for heavy-duty fastening and fastener removal. This is a high torque impact wrench designed for loosening and tightening large, stubborn fasteners. Model Number: 2967-22. If you work on trucks, equipment, structural steel, or rusty automotive hardware, this kit gives you big-output performance in a more compact package than older high torque models.
The headline numbers matter here because they translate directly to real work. Milwaukee rates this tool at up to 1,100 ft-lbs of fastening torque and up to 1,500 ft-lbs of nut-busting torque when paired with the included M18 REDLITHIUM XC5.0 battery. In plain terms, that means you have enough power for seized suspension bolts, heavy lag fastening, fleet maintenance, and industrial service work without stepping up to a larger corded tool or air setup.
What makes this one stand out is the balance of output and size. Milwaukee lists the tool at 7.6 inches in length, which is short for a high torque impact wrench in this class. That shorter nose helps when you are working inside wheel wells, between framing members, around machinery guards, or anywhere clearance is limited. You are not just getting raw power here. You are getting power that is easier to position.
The POWERSTATE brushless motor and REDLINK PLUS intelligence are there for more than branding. The brushless motor is built to deliver hard-hitting torque efficiently, while the electronics are meant to help protect the tool and battery from overload, overheating, and over-discharge. On a busy jobsite or in a shop where the tool gets used back-to-back, that matters because it helps maintain performance instead of falling off when the work gets demanding.
Milwaukee also gave this impact wrench features that make day-to-day use better. The friction ring anvil makes socket swaps faster, which is exactly what you want when moving between common automotive and mechanical sizes. The Tri-LED work lights improve visibility with fewer shadows around the socket area, which helps when you are reaching into dark underbody or equipment-service spaces. The patented battery isolation system is designed to keep the pack connection secure while controlling vibration sent into the battery.
The control package is one of the more useful parts of this tool. 4-Mode DRIVE CONTROL gives you different speed and power settings so you can match the tool to the job instead of hammering every fastener at full force. Milwaukee also includes auto shut-off, which limits torque to no more than 50 ft-lbs in that mode to help prevent overtightening, and a bolt-removal mode that hits hard to break the fastener free, then slows to 750 RPM for better control during removal. That is especially useful when you do not want a lug nut or flange nut flying off once it breaks loose.
As a kit, this setup is job-ready out of the box. You get the tool, (2) M18 REDLITHIUM XC5.0 Resistant Batteries, an M18 and M12 multi-voltage charger, and a blow molded case. The included resistant batteries are called out for added protection against oils, greases, and solvents, which makes sense for automotive bays, equipment service trucks, and industrial maintenance environments where batteries see more than clean sawdust.
This impact wrench is part of the Milwaukee M18 platform, so it is compatible with all M18 batteries and chargers. That matters if you are already on M18 and want a serious fastening tool without adding another battery system. For the right user, this is the kind of cordless impact wrench that can replace a lot of air-tool use while giving you better mobility around the shop, driveway, or jobsite.
Who should buy it? Pros doing automotive repair, heavy equipment service, general mechanical work, and construction fastening will get the most from it. Serious DIY users working on trucks, trailers, or rust-prone vehicles will also appreciate it, especially if they already own M18 batteries. If you need compact reach but still want true high torque output, this is the version to look at.
High Torque Without the Extra Bulk
This kit is set up for real work, not just the bare tool shelf. You get the high torque impact wrench, two resistant batteries, a multi-voltage charger, and a carry case, so it is ready for the truck, service cart, or garage the day it arrives.
- Includes (2) M18 REDLITHIUM XC5.0 Resistant Batteries for demanding shop and jobsite use
- Includes M18 and M12 charger plus blow molded case for storage and transport
What’s in the Box
- (1) M18 FUEL 1/2″ High Torque Impact Wrench with Friction Ring (2967-20)
- (2) M18 REDLITHIUM XC5.0 Resistant Batteries (48-11-1850R)
- (1) M18 and M12 Multi-Voltage Charger (48-59-1812)
- (1) Blow Molded Case
- (1) Owner’s Manual
At a Glance
1,100 ft-lbsFastening Torque 1,500 ft-lbsNut-Busting Torque 7.6 inTool Length 7.5 lbsWeight with Battery
Key Specifications
| Voltage | 18V |
|---|---|
| Drive Size | 1/2 in square with friction ring |
| Fastening Torque | Up to 1,100 ft-lbs |
| Nut-Busting Torque | Up to 1,500 ft-lbs |
| Length | 7.6 in |
| Weight | 7.5 lbs |
| Speed Modes | 4-Mode DRIVE CONTROL with auto shut-off and bolt-removal mode |
| Work Light | Tri-LED |
Compatibility
Battery PlatformCompatible with all Milwaukee M18 batteries. Charger SystemIncludes an M18 and M12 multi-voltage charger and works within Milwaukee’s M18 charging system. Socket InterfaceUses a 1/2 inch square anvil with friction ring for quick socket changes.
Built For
Automotive Repair Heavy Equipment Service Fleet Maintenance Construction Fastening Mechanical Work Shop Use Jobsite Service Serious DIY Truck Work
Pro Tip
Use auto shut-off mode when running lug nuts or other critical fasteners down to seat them without blasting past the mark, then finish with a torque wrench. For rusty hardware, switch to bolt-removal mode so the tool hits hard to break it loose and then slows down before the nut spins off.
Warranty & Support
5 Years Limited Factory Warranty. 30 Day Satisfaction Guaranteed.
Tool Nut’s Take
Tool Nut’s Take
Milwaukee 2967-22 M18 FUEL 18V 1/2″ High Torque Impact Wrench Friction Ring Kit Hits Hard and Still Fits Where You Need It
This is the kind of cordless high torque impact wrench that makes a lot of guys leave the air hose hanging on the wall.
- Who it’s for: Mechanics, fleet techs, equipment service crews, and serious DIY users who deal with rusted or high-torque fasteners on a regular basis.
- Why it stands out: You are getting real high torque numbers, a short 7.6 inch body, useful control modes, and a ready-to-work kit with two resistant batteries and a case.
- Worth knowing: This is still a high torque tool, so it is built for bigger fasteners and heavier work. The auto shut-off mode is a smart feature, but final torque on critical fasteners should still be verified with a torque wrench.
Common Questions
- Is this a bare tool or a full kit? It is a full kit that includes the impact wrench, two M18 REDLITHIUM XC5.0 Resistant Batteries, an M18 and M12 charger, a blow molded case, and the manual.
- What battery platform does it use? This tool runs on the Milwaukee M18 platform and is compatible with all M18 batteries and chargers.
- Does it use a pin detent or friction ring? This model uses a 1/2 inch square friction ring anvil for faster socket changes.
- Does it have multiple speed settings? Yes. It has 4-Mode DRIVE CONTROL, plus auto shut-off and bolt-removal mode for better control over speed and output.
Reviews
There are no reviews yet.