Milwaukee 48-08-0571 55″ Track Saw Guide Rail

Key Features

Straight, Clean CutsThe extruded aluminum rail gives your plunge track saw a straight path to follow, while the anti-splinter strip helps reduce tear-out for cleaner edges on finished material. Stays Put BetterAnti-slip strips help keep the guide rail from shifting during the cut, which means less setup fuss and more confidence when you’re working on sheet goods or finish panels. Built for Track SawsThis Milwaukee guide rail is made to work with the M18 FUEL 6-1/2 inch Plunge Track Saw and also supports Milwaukee rail clamps, connectors, and track bag accessories.

Overview

The Milwaukee 48-08-0571 55″ Track Saw Guide Rail is a track saw accessory built for carpenters, remodelers, and woodworkers who need long, straight cuts without wrestling full sheets across a table saw. This is a guide rail designed for straight, splinter-resistant cuts with a plunge track saw. Model Number: 48-08-0571.

What matters here is not just the 55 inch length. It is how that length helps when you’re breaking down plywood, trimming panels, or making long rip cuts with better control than a freehand circular saw setup. The extruded aluminum construction gives the rail the rigidity needed for precise straight cuts, and the anti-splinter strip helps reduce tear-out so the cut edge comes off cleaner, especially on finished faces and veneered sheet goods.

Milwaukee also built this guide rail around real jobsite use. Anti-slip strips help keep the track from moving during the cut, which can save setup time when you are working on a bench, sacrificial foam, or a pair of sawhorses. That does not replace clamps in every situation, but it does make the system faster and easier to work with when the material and surface allow it.

For users already in the Milwaukee track saw system, this rail is designed to pair with the M18 FUEL 6-1/2 inch Plunge Track Saw (2831-20). It is also compatible with Milwaukee rail clamps 48-08-0573, the Milwaukee rail connector 48-08-0575, and the Milwaukee track bag. That matters because a guide rail is only as useful as the system around it. If you plan to expand your setup, the accessory support is already there.

At 5.1 pounds, the rail is substantial enough to feel stable without being a pain to carry around the jobsite. The low 0.4 inch height keeps the profile slim, while the 7.4 inch width gives the saw a proper bearing surface. In plain terms, it is built to guide the saw accurately without adding a lot of bulk.

This is the right buy for the pro or serious DIY user who already owns a compatible plunge track saw and wants cleaner panel work, straighter cuts, and more repeatable results. If your work includes cabinetry, built-ins, remodeling, countertop fitting, or breaking down sheet goods in a space where a table saw is not practical, this guide rail earns its keep fast.

At a Glance

55 inRail Length5.1 lbWeight7.4 inWidth

Cleaner Cuts on Finished Material

If you are cutting visible faces, edge quality matters. This rail is built to help the saw track straight while the anti-splinter strip reduces tear-out, so you spend less time cleaning up the edge after the cut.

• Anti-splinter strip helps produce cleaner, finish-quality cuts
• 55 inch length is useful for long panel cuts and sheet goods breakdown

Stable Setup Without Extra Fuss

A guide rail only helps if it stays where you put it. The anti-slip strips are there to reduce movement during the cut, which helps speed up setup and keeps the saw tracking where it should.

• Anti-slip strips help keep the rail from shifting during cuts
• Compatible with Milwaukee clamps 48-08-0573 when added hold-down is needed

Built as Part of a System

This is not just a straightedge. It is part of Milwaukee’s plunge track saw setup, so you can build out a more capable cutting system with matching connectors, clamps, and transport gear.

• Designed for the Milwaukee M18 FUEL 6-1/2 inch Plunge Track Saw 2831-20
• Compatible with Milwaukee rail connector 48-08-0575 and track bag

What’s in the Box

• (1) 55 inch Guide Rail

Key Specifications

Length	55.0 in
Weight	5.1 lb
Height	0.4 in
Width	7.4 in
Material	Extruded aluminum
Made In	Viet Nam

Compatibility

Track Saw Fit Designed for the Milwaukee M18 FUEL 6-1/2 inch Plunge Track Saw (2831-20). Rail Accessories Compatible with Milwaukee clamps (48-08-0573), Milwaukee rail connector (48-08-0575), and Milwaukee track bag. Cross-System Note Tool Nut lists Milwaukee, Makita, Festool, and Triton track saws and guide rails as compatible and interchangeable.

Built For

CarpentryRemodelingWoodworkingSheet Goods BreakdownStraight Rip CutsFinish-Quality Panel Cuts

Pro Tip

When you’re cutting veneered plywood or prefinished panels, line up the anti-splinter edge exactly to your cut mark and make a test pass on scrap first. The anti-slip strips help with quick setup, but on slick surfaces or narrow parts, add the Milwaukee clamps for a more secure hold.

Warranty & Support

No manufacturer’s warranty is listed for this product.

Tool Nut’s Take

Tool Nut’s Take

Why the Milwaukee 48-08-0571 55″ Track Saw Guide Rail Earns Its Keep

This is the piece that turns a good plunge track saw into a real panel-cutting system.

• Who it’s for: Carpenters, remodelers, cabinet installers, and serious DIY users who want straighter cuts and better edge quality on plywood, panels, and finished stock.
• Why it stands out: The combination of extruded aluminum, anti-slip strips, and an anti-splinter edge hits the stuff that actually matters on the job: straight cuts, cleaner edges, and faster setup.
• Worth knowing: This is a guide rail, not a complete saw setup. It makes the most sense if you already have the compatible Milwaukee plunge track saw or plan to build out the rail system with clamps and connectors.

Common Questions

• What saw is this guide rail designed for? It is designed for the Milwaukee M18 FUEL 6-1/2 inch Plunge Track Saw, model 2831-20.
• Does this guide rail help reduce tear-out? Yes. It includes an anti-splinter strip to help reduce tear-out during cuts.
• Can the rail be clamped down? Yes. It is compatible with Milwaukee clamps, model 48-08-0573.
• What is the rail made from? The guide rail is made from extruded aluminum for precision straight cuts.