Key Features
110 Inches of TrackTwo 55 inch guide rails and the included connector let you build a long, straight track for sheet goods, long rip cuts, and cleaner breakdown work without fighting a chalk line. Cleaner Track Saw CutsThe Milwaukee Track Saw 110-in. Guide Rail Kit and Accessory Bundle pairs anti-splinter guide rails with a 6-1/2 inch 24 tooth blade built for fast, accurate cutting with less tear-out. Ready to TravelClamps, bag, and connector are already part of the bundle, so you can secure the rails, transport them safely, and keep the whole setup together for shop or jobsite work.
Overview
The Milwaukee Track Saw 110-in. Guide Rail Kit and Accessory Bundle is a rail and accessory package built around Milwaukee’s track saw system for clean, controlled cutting. This is a guide rail kit designed for straight-line track saw cutting, sheet goods breakdown, and finish-quality rip and crosscuts. If you are setting up a Milwaukee plunge track saw for cabinet work, remodeling, built-ins, or jobsite panel cutting, this bundle gives you the core rail setup plus the accessories that usually get added after the fact. Bundle SKU: 10030006960422.
The big draw here is simple: you get two 55 inch guide rails, which gives you flexibility right away. Run a single rail for shorter cuts or join both rails with the included connector to create roughly 110 inches of guided cutting length for full-size panels and longer material. That matters when you are breaking down plywood, trimming doors, sizing countertop substrate, or making long finish cuts where a straight edge and clamps are slower and less consistent.
The rails themselves are built from extruded aluminum, which is what you want in a guide rail. It keeps the track straight, stable, and light enough to move around the job without turning setup into a chore. Milwaukee also includes anti-slip strips to help the rail stay put during the cut and an anti-splinter edge strip to reduce tear-out. In practical terms, that means less shifting during setup and a cleaner edge on visible material.
The included Milwaukee 6-1/2 inch 24 tooth general purpose track saw blade rounds out the kit in a smart way. Instead of making you source a blade separately, this bundle gives you a thin kerf blade built specifically for plunge track saw work. The laser-cut body, vibration slots, and anti-friction coating are there for a reason: smoother tracking, less wobble, cleaner cuts, and better life when you are working through plywood, oriented strand board, softwoods, wet lumber, treated lumber, or laminated veneer lumber.
Milwaukee also bundled in the accessories that make a track system easier to live with. The guide rail clamps are designed to lock the rail down when you need extra hold on slick, finished, or awkward material. The nonmarring feet help prevent marking up the work surface. The guide rail bag protects the rails in transit and gives you a place to store clamps, connectors, and replacement strips instead of letting them rattle around the truck. That is a small thing until you have owned rails for a while, then it becomes a big thing.
Compatibility is another strong point. The rails are designed for the Milwaukee M18 FUEL 6-1/2 inch Plunge Track Saw, and the supplied product data also states compatibility across Milwaukee, Makita, Festool, and Triton track saws and guide rails. For users already invested in one of those systems, that makes this bundle more flexible than a one-brand-only setup. It also means replacement or expansion is easier if you already own parts from one of those platforms.
This kit makes the most sense for carpenters, remodelers, cabinet installers, and serious do-it-yourself users who want straight, repeatable cuts without dragging a full table saw into every space. It is also a good fit for anyone buying into a track saw setup who wants the rails, blade, clamps, connector, and storage bag handled in one purchase. If your work includes plywood breakdown, built-in installation, trim panels, shelving, or long straight cuts on finished material, this is the practical way to get your Milwaukee track saw setup off the ground.
Long Cuts Without the Table Saw Shuffle
This bundle is built for the part of track saw work that saves the most time: getting long, straight cuts dialed in fast. With two rails, clamps, and a connector in one package, you are not piecing together a system one order at a time.
- Includes (2) 55 inch guide rails for short or extended cutting setups
- Included rail connector joins both rails for longer applications
- Guide rail clamps help keep the setup from shifting during the cut
Built for Cleaner, Straighter Results
The rails do more than guide the saw. The anti-splinter edge and anti-slip strips are what help turn a cordless plunge saw into a finish-capable cutting setup for trim panels, shelving, and built-in parts.
- Extruded aluminum construction is designed for precision straight cuts
- Anti-splinter strip helps reduce tear-out during cuts
- Anti-slip strips help the rail stay planted on the workpiece
Blade and Accessories That Finish the Setup
A track setup works better when the support gear is right. Milwaukee includes a dedicated track saw blade, rail clamps, and a rail bag, so the system is easier to use, easier to carry, and ready for repeat work.
- 6-1/2 inch 24 tooth thin kerf blade is optimized for track saw use
- Laser cut body and vibration slots help reduce wobble and warping
- Guide rail bag fits 31 inch and 55 inch guide rails and adds storage for accessories
What’s in the Box
- (2) Milwaukee 48-08-0571 55 inch Guide Rails
- (1) Milwaukee 48-40-0624 6-1/2 inch 24 Tooth General Purpose Track Saw Blade
- (1) Milwaukee 48-08-0573 Guide Rail Clamps set
- (1) Milwaukee 48-08-0576 Guide Rail Bag
- (1) Milwaukee 48-08-0574 Guide Rail Connector
Track saw not included.
Key Specifications
| Product Type | Guide rail and accessory bundle |
|---|---|
| Total Rail Length | 110 in |
| Individual Rail Length | 55 in each |
| Blade Diameter | 6-1/2 in |
| Blade Tooth Count | 24T |
| Blade Arbor Size | 20 mm |
| Max Blade Speed | 10,000 RPM |
| Weight | 17.6 lbs |
Compatibility
Track Saw Platform Designed for the Milwaukee M18 FUEL 6-1/2 inch Plunge Track Saw (2831-20). Milwaukee Rail Accessories Guide rails work with Milwaukee rail clamps, rail connectors, and the Milwaukee track bag. Cross-Brand Rail Fit Provided product data states Milwaukee, Makita, Festool, and Triton track saws and guide rails are compatible and can be used interchangeably.
Built For
CarpentryRemodelingCabinet InstallationWoodworkingSheet Goods BreakdownFinish Cuts
Pro Tip
Use the included clamps whenever you are cutting slick prefinished panels or making a full-length joined-rail cut. The anti-slip strips help, but on long cuts the clamps take one more variable out of the equation and keep the rail exactly where you set it.
Tool Nut’s Take
Tool Nut’s Take
Milwaukee Track Saw 110-in. Guide Rail Kit and Accessory Bundle Covers the Stuff You Actually Need
This is the smart buy for someone setting up a Milwaukee track saw system and wanting the rails, blade, clamps, connector, and bag handled in one shot.
- Who it’s for: Carpenters, remodelers, cabinet installers, and serious shop users breaking down sheet goods or chasing straight finish cuts on site.
- Why it stands out: You are not just getting rails. You are getting the pieces that make the rail system usable day to day, plus a track saw blade that is built for clean plunge-cut work.
- Worth knowing: This is an accessory bundle, not a full saw kit. If you already own a compatible track saw, it makes a lot of sense. If not, you still need the saw.
Common Questions
- Can these rails be joined for longer cuts? Yes. The included guide rail connector is designed to join two guide rails so you can handle longer cutting applications.
- What track saw is this rail system designed for? The rails are designed for the Milwaukee M18 FUEL 6-1/2 inch Plunge Track Saw (2831-20).
- Will the included blade work for general wood cutting? Yes. The 6-1/2 inch 24 tooth general purpose track saw blade is listed for plywood, oriented strand board, softwoods, wet lumber, treated lumber, and laminated veneer lumber.
- Are other guide rail brands listed as compatible? Yes. The provided product data states Milwaukee, Makita, Festool, and Triton track saws and guide rails are compatible and interchangeable.
Reviews
There are no reviews yet.