Sale!

Monnit MNS2-9-IN-VM-010 Industrial Wireless 0-10 VDC Voltage Meter

Original price was: $221.70.Current price is: $55.43.

Buy now
SKU: MNS2-9-IN-VM-010 Category: Tag:

MNS2-9-IN-VM-010 Includes Only:

  • Wireless Sensor Mounting Hardware
  • 3V Industrial Battery (Pre-Installed)
  • SMA Antenna

Features:

  • Resolution: 1 mV
  • Accuracy:
    • Uncalibrated: ± 2.0% of reading ± 0.002 VDC
    • Calibrated: ± 0.5% of reading ± 0.002 VDC
  • Configurable thresholds for critical condition monitoring
  • Wireless range of 2,000+ feet through 18+ walls
  • Frequency-Hopping Spread Spectrum (FHSS)
  • Best-in-class interference immunity
  • Best-in-class power management for longer battery life
  • Encrypt-RF Security (Diffie-Hellman Key Exchange + Advanced Encryption Standard (AES)-128 Cipher Block Chaining (CBC) for sensor data messages)
  • Sensor logs 2000 to 4000 readings if the gateway connection is lost (non-volatile flash, persists through power cycling):
    • 10-minute Heartbeats = ~ 22 days
    • 2-hour Heartbeats = ~ 266 days
  • Automatic over-the-air updates to sensor firmware (future-proof)

Applications:

  • Battery health
  • Voltage measurement
  • Transducer measurement
  • Machinery
  • Electrical motors

The ALTA Wireless 5 and 10 VDC Voltage Meter measures the single-ended DC voltage across its two leads based on a user-configurable time interval or Heartbeat. On every Heartbeat, the sensor converts the analog voltage signal to a digital voltage measurement.

The ALTA 5 and 10 VDC Voltage Meter can be calibrated for improved accuracy. Also, remember to remove any active voltages from the measurement leads when replacing batteries or performing other maintenance.

Technical Details

Meter Range 0 to 10 VDC
Input impedance 247 kOhm
Max rated input 20 volts
Uncalibrated accuracy ± 2.0% of reading ± 0.002 VDC
Calibrated accuracy ± 0.5% of reading ± 0.002 VDC
Resolution 1 mV
Wire Lead Cable length 0.3 m (1′)
Wire count 2-conductor (red/black)
Wire gauge 22 AWG
Conductor material Stranded Copper 7/30
Insulation PVC, 0.010″
Shield No
Jacket PVC (black)
Overall diameter 3.56 mm (0.14″)
Ratings / Approvals NEC (UL) Type CM, UL AWM Style 2464, CSA AWM FT4, RoHS Compliant
Temperature Rating -20° to 60°C (-4° to 140°F)
Voltage Rating 300 V Max
Dielectric Strength 1500 V RMS
Wireless Data logging Sensor logs 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through power cycling): 10-minute Heartbeats = ~22 days, 2-hour Heartbeats = ~266 days
Wireless protocol ALTA Proprietary Frequency-Hopping Spread Spectrum (FHSS)
Wireless transmission power (EIRP) 50 mW (900MHz), 25 mW (868 MHz), 10 mW (433 MHz)
Wireless range 2,000+ ft. through 18+ walls with the ALTA XL Gateway
Security Encrypt-RF (256-bit key exchange and AES-128 CTR)
Battery voltage range 2.0 to 3.8 VDC
Operating altitude (non-pressurized environments) -15.2 to 1,982 m (-50 to 6,500 ft)
Storage altitude (non-pressurized environments) -15.2 to 3,048 m (-50 to 10,000 ft)
Operating humidity 5 to 85% RH (non-condensing)
Battery 1x 3.6V AA Lithium Thionyl Chloride, 1500mAh, pre-installed
Battery Life 10+ years expected
Operating Temperature Range (non-leaded measurement range) -40°C to 85°C (-40°F to 185°F)
Wireless Antenna Type 1/2-wave waterproof dipole with RP-SMA connector and swivel neck; dBi of 3.0 (900/868MHz) or 2.5 (433 MHz); length of 8.27″ (210mm) (900/868MHz) or 7.68″ (195mm) (433 MHz); diameter at thickest point of 0.55″ (14mm)
Weight 4.7 oz. (133 g) with 0.3 m (1′) lead
Enclosure Rating IP-65 (dust-proof and waterproof but not submersible)
Additional Enclosure Rating NEMA 1, 2, 4, 4x, 12, and 13 rated, sealed, and weatherproof
UL Rating UL Listed to UL508-4x specifications (File E194432)

Reviews

There are no reviews yet.

Be the first to review “Monnit MNS2-9-IN-VM-010 Industrial Wireless 0-10 VDC Voltage Meter”

Your email address will not be published. Required fields are marked *

Shopping Cart
Monnit MNS2-9-IN-VM-010 Industrial Wireless 0-10 VDC Voltage MeterMonnit MNS2-9-IN-VM-010 Industrial Wireless 0-10 VDC Voltage Meter
Original price was: $221.70.Current price is: $55.43.
Buy now
Scroll to Top