Key Features
48 Inch CrosscutsThe SawStop Sliding Crosscut Table gives you up to 48 inches of crosscut capacity, so large panels and wide stock are easier to handle with better control at the saw. Aircraft-Grade BuildT-6 6061 aircraft-grade aluminum extrusions keep the table rigid without making it unnecessarily heavy, which matters when you want smooth travel and repeatable cuts. Fence and Miter ControlA fence that extends to 58 inches, pressure-adjustable scale, and a miter gauge range of plus or minus 60 degrees help you dial in accurate crosscuts, miters, and repeat stops without fighting the setup.
Overview
The SawStop Sliding Crosscut Table, model TSA-SA48, is a table saw crosscut accessory built for woodworkers who want cleaner, more controlled panel cutting and repeatable accuracy on wide stock. This is a sliding crosscut table designed for accurate crosscutting, miter cuts, and panel handling on compatible SawStop table saws. If you regularly break down cabinet parts, trim wider boards to length, or need better support than a standard miter gauge setup gives you, this accessory solves a real problem.
What makes the SawStop Sliding Crosscut Table matter is capacity and control. It offers up to 48 inches of table crosscut capacity and 36 inches in flush-mount configuration, with 55 inches of table travel. That gives you room to support large workpieces through the cut instead of balancing them at the blade and hoping everything stays square. On jobs where panel accuracy matters, that extra support can be the difference between a part that fits and one that goes in the scrap pile.
The fence setup is built for real shop use, not just spec-sheet bragging. The main fence is 43 inches wide and extends to 58 inches, which gives you more reach for wide crosscuts and stop-block work. The imperial and metric fence scale helps if your shop bounces between measurement systems, and the pressure-adjustable scale gives you a way to fine-tune the readout so your tape, blade line, and stop location all agree. That kind of adjustability matters when you are making repeated parts and need them to stay consistent.
The miter side of the system is just as useful. With a plus or minus 60 degree measurement range, the SawStop Sliding Crosscut Table is more than a straight crosscut sled alternative. It is built for angled work where you still want support under the material. The included two large flip stops make it easier to batch out repeated lengths without resetting every board, and the knurled pivot handle gives you a more secure, more deliberate way to make adjustments.
Build quality is a big part of why this accessory stands out. SawStop uses T-6 6061 aircraft-grade aluminum extrusions, which are a smart choice here because they combine rigidity, straightness, and smooth sliding performance. For an accessory like this, stiffness matters. If the fence or sliding assembly flexes, your accuracy disappears fast. The engineering here is aimed at keeping the work supported, the fence stable, and the travel smooth across the full stroke.
From a setup standpoint, this is not a generic add-on made to sort of fit everything. It uses pre-drilled mounting holes for SawStop saws, which is a big advantage for owners already in the SawStop system. You are buying an accessory that is meant to integrate with the brand’s saw platform rather than forcing a universal solution onto a machine it was not designed around. That usually means less installation guesswork and a cleaner end result.
The SawStop Sliding Crosscut Table is a strong fit for cabinet shops, furniture builders, serious hobby woodworkers, and anyone who routinely crosscuts sheet goods, shelving parts, face-frame stock, or wide hardwood panels. If your work stays mostly narrow and simple, a standard miter gauge may be enough. But if you want better support, better repeatability, and an easier way to handle wider material on a SawStop table saw, this accessory earns its space.
Support Wide Stock with More Control
Wide boards and panel parts get awkward fast on a table saw. This setup gives the workpiece real support through the cut, so you can focus on keeping the cut accurate instead of fighting the material.
- Up to 48 in. crosscut capacity for larger workpieces
- 55 in. table travel helps carry the stock smoothly through the blade path
Dial In Angles and Repeats Faster
When you are batching parts, the little setup details matter. A long fence, readable scale, and flip stops save time and help keep every piece matching the first one.
- Fence width is 43 in. and extends to 58 in.
- Includes 2 large flip stops and an imperial/metric fence scale
Built for Smooth Travel and Rigidity
A sliding table only helps if it stays straight and moves predictably. The construction here is aimed at keeping the assembly rigid and the adjustments easy to make without slop.
- T-6 6061 aircraft-grade aluminum extrusions for strength and stability
- Knurled pivot handle helps with secure, deliberate adjustments
SawStop Sliding Crosscut Table Integration
This is not a one-size-fits-all add-on. It is made to mount to SawStop saws using pre-drilled holes, which is exactly what you want if you care about straightforward installation and a cleaner fit.
- Pre-drilled mounting holes for SawStop saws
- Designed as a dedicated SawStop table saw accessory, not a generic aftermarket workaround
What’s in the Box
- (1) Sliding Table Assembly
- (2) Support Legs
- (1) Fence Assembly
- (1) Fence Extension Support Plate
- (1) Extension Table Assembly
- (2) Flip Stops
- (1) Knurled Pivot Handle
- (1) 2 in. Grommet for CNS Saw
- (1) Switch Box Mounting Bracket
- (1) Owner’s Manual
- (5) Hardware Packs
Key Specifications
| Model | TSA-SA48 |
|---|---|
| Product Type | Sliding Crosscut Table |
| Material | T-6 6061 aircraft-grade aluminum extrusions |
| Table Depth | 47-1/4 in. |
| Table Travel | 55 in. |
| Crosscut Capacity | 48 in. |
| Crosscut Capacity, Flush Mount | 36 in. |
| Fence Width | 43 in. |
| Fence Extension | 58 in. |
| Fence Scale | Imperial / Metric |
| Miter Gauge Range | Plus or minus 60 degrees |
| Mounting Type | Pre-drilled holes for SawStop saws |
Compatibility
Saw PlatformUses pre-drilled mounting holes for SawStop saws. Installation OptionsSupports standard crosscut capacity up to 48 in. and flush-mount configuration with 36 in. capacity.
Built For
Woodworking Cabinet Making Furniture Building Panel Crosscutting Repeat Cut Work Shop Use
Pro Tip
Before you start batching parts, set the pressure-adjustable fence scale to match an actual test cut instead of trusting the tape right out of the box. It takes a few minutes up front, but it saves a lot of sneaky mis-measures when you are running repeated lengths with the flip stops.
Tool Nut’s Take
Tool Nut’s Take
Why the SawStop Sliding Crosscut Table Is Worth the Space
If you do serious crosscut work on a SawStop saw, this is the kind of accessory that makes the whole machine more capable.
- Who it’s for: Woodworkers, cabinet builders, and serious hobbyists who need better support and repeatability for wide stock and panel parts.
- Why it stands out: The big selling points are the 48 in. crosscut capacity, long fence with flip stops, and the dedicated SawStop fit instead of a universal compromise.
- Worth knowing: This is an accessory, not a stand-alone cutting system. You get a well-thought-out setup, but it is meant for compatible SawStop saw owners who will actually use the capacity and fence system.
Common Questions
- What is the maximum crosscut capacity? The maximum listed crosscut capacity is 48 in.
- What is the crosscut capacity in flush-mount installation? In flush-mount configuration, the listed crosscut capacity is 36 in.
- How far does the fence extend? The fence is 43 in. wide and extends to 58 in.
- What angle range does the miter gauge support? The listed measurement range is plus or minus 60 degrees.
- Is this made for SawStop saws? Yes. The mounting type is listed as pre-drilled holes for SawStop saws.
Reviews
There are no reviews yet.