Key Features
Reaches Jobsite Height This pole gives you adjustable laser placement from roughly floor level to about 12 feet high, so you can set line and point lasers where they actually need to be instead of working around a bad setup. Fast Twist-and-Lock Setup The Stabila LT 30 telescopic laser support pole uses a simple twist-and-lock design with fine adjustment, which makes it quicker to dial in height and lock the pole in place on interior jobs. Works in Tight Rooms Built for cramped conditions, this support pole gives your laser a stable mounting point without taking up the footprint of a tripod, which is a real advantage in finished rooms and narrow work areas.
Overview
The Stabila 07467 LT 30 Telescopic Laser Support Pole with Mounting Bracket is a laser support pole for positioning compatible lasers at the height you need on interior jobs. This is a telescopic laser support pole designed for mounting and positioning lasers in indoor layout, leveling, and alignment work. Model Number: 07467. If you use line lasers or point lasers and need a stable setup without dragging a tripod into every room, this is the kind of accessory that makes the laser more useful right away.
The big advantage here is adjustable working height. Based on the available product data, the LT 30 can position a laser from roughly 7 inches to 145 inches, which covers low reference work near the floor and standard room-height setup for wall, ceiling, and layout tasks. On the job, that means you can place the beam where it needs to be instead of compromising because the support method is in the way.
Stabila also builds in a practical mounting setup. The bracket uses both 1/4 inch and 5/8 inch threaded connections, which matters because those are the common thread sizes used by many construction lasers. In plain terms, this gives the pole broader compatibility with jobsite lasers and saves you from chasing special adapters just to get working.
Setup is geared toward speed. Tool Nut and ToolUp both reference the twist-and-lock design, and Tool Nut also notes a fine adjustment pneumatic pump that helps lock the pole in place. That is the kind of feature that matters when you are moving room to room and need the support to go up fast, hold its position, and let you make smaller height corrections without fighting the whole assembly.
This support pole is also built with jobsite practicality in mind. The anti-slip rubber feet described in the supplementary data are there for a reason: they help the pole hold against the floor and ceiling without marking finished surfaces. That makes this a better fit for remodeling, punch list work, and interior finish environments where stability matters but damage to floors or ceilings is not an option.
Another useful detail is that the pole can also serve as a support with a listed load capacity of up to 65 lbs. For most buyers, the main story is still laser placement, but that load rating speaks to the overall sturdiness of the system. At the same time, the pole collapses to about 53 inches for transport and storage, so it is long enough to do the job without turning into a hassle every time you load the truck.
The best fit for this accessory is interior construction trades that rely on laser layout: remodeling crews, finish carpenters, drywall installers, ceiling contractors, electricians, plumbers, and general contractors doing room-by-room work. If you regularly work in finished spaces, hallways, bathrooms, or other tight areas where a tripod is awkward, this Stabila support pole makes a lot of sense.
Stable Laser Placement Without a Tripod Footprint
If you have ever tried to set a laser in a narrow room with a tripod underfoot, you already know why a support pole matters. This setup gives you vertical mounting from floor to ceiling, keeps the work area cleaner, and helps you place the laser closer to the exact working height you need.
- Adjustable working height is listed at approximately 7 in. to 145 in.
- Collapses to about 53 in. for easier transport and storage
- Designed for cramped conditions where tripod placement is a problem
What’s in the Box
- (1) Telescopic Laser Pole
- (1) Mounting Bracket
Key Specifications
| Product Type | Telescopic laser support pole |
|---|---|
| Adjustable Working Height | Approx. 7 in. to 145 in. |
| Collapsed Length | Approx. 53 in. |
| Thread Sizes | 1/4 in. and 5/8 in. |
| Load Capacity | Up to 65 lbs |
| Weight | 6 lbs |
Compatibility
Laser Mounting Threads Works with lasers that use standard 1/4 in. or 5/8 in. threaded mounting points. Application Fit Built for indoor laser setup where floor-to-ceiling support is more practical than a tripod.
Built For
Interior Construction Remodeling Finish Carpentry Drywall Electrical Plumbing Layout Work Tight Indoor Spaces
Pro Tip
If you are working in finished rooms, use the LT 30 instead of a tripod when you need the laser close to a wall or tucked into a narrow space. The floor-to-ceiling setup frees up floor space and usually gets the beam closer to your actual reference height with less repositioning.
Tool Nut’s Take
Tool Nut’s Take
Stabila 07467 LT 30 Telescopic Laser Support Pole with Mounting Bracket is the right call for tight interior laser work
This is one of those accessories that does not look flashy, but it solves a real problem fast: getting your laser exactly where you need it without wasting floor space.
- Who it’s for: Contractors and serious DIY users doing interior layout, remodeling, finish work, and laser setup in rooms where a tripod gets in the way.
- Why it stands out: Wide height range, standard 1/4 in. and 5/8 in. mounting threads, compact collapsed size, and a design built specifically for cramped indoor conditions.
- Worth knowing: This is a support accessory, not a laser. It makes the most sense if you already rely on a compatible laser and want a cleaner, more flexible way to position it.
Common Questions
- What kind of product is this? It is a telescopic laser support pole with a mounting bracket for positioning compatible lasers indoors.
- What thread sizes does it support? The available product data lists both 1/4 in. and 5/8 in. threaded mounting points.
- How tall does it extend? Supplementary product data lists an adjustable working height of approximately 7 in. to 145 in., or roughly up to 12 ft.
- Is it suited for tight rooms? Yes. The product information specifically calls out use in cramped conditions, which is one of the main reasons to choose this style of support over a tripod.
Reviews
There are no reviews yet.