The V.E.S.P.A. Polishing System (Value Engineered Simplified Polished Application) is designed for the concrete polishing industry as a cost-effective alternative to traditional multi-step polishing systems.
It combines a hybrid metal bond matrix with a diamond-embedded pad to deliver faster cutting, faster honing, and efficient polishing on flat concrete surfaces.
V.E.S.P.A. pads are designed for use on burnishing machines, buffing equipment, and automatic scrubbers, making them highly versatile for both polishing and maintenance applications.
These pads are ideal for new, flat concrete surfaces and can also be used for refurbishment of previously densified floors when properly prepared.
Key Features
- Fast cut, hone, and polish performance
- Hybrid metal bond diamond technology
- Can be used wet or dry
- Designed for burnishers, scrubbers, and polishing machines
- Reversible pad (can also be used for cleaning/burnishing applications)
- Economical alternative to traditional multi-step polishing systems
Specifications
- Diameters: 14″, 16″, 18″, 20″, 27″
- Thickness: 1 inch
- Maximum Speed: 1500 RPM
- Operating Range: 200–1500 RPM
- Application: Wet or Dry use
Grit Color Guide
- 30 Grit – Light Blue
- 50 Grit – Blue
- 100 Grit – Gray
- 200 Grit – Yellow
- 400 Grit – White
- 800 Grit – Green
- 1500 Grit – Red
Coverage
Coverage will vary depending on surface condition, porosity, density, and application technique.
On flat, dense concrete surfaces, expected coverage ranges from:
- 5,000 to 8,000 sq. ft. per pad
Applications
- Concrete polishing and refinement
- Surface preparation for densifiers and hardeners
- Light refurbishment of worn polished concrete
- Maintenance polishing schedules
- Use with automatic scrubbers and burnishers
- Prepping surfaces for guard or sealer systems
Lower grits (30, 50, 100) are especially effective for rapid mechanical preparation prior to coatings or overlays.
Usage Notes
The V.E.S.P.A. system is designed to progressively open, hone, and polish concrete surfaces up to 1500 grit, creating a surface ready for densifier, guard, or sealer application.
For older or uneven concrete, initial grinding with traditional diamond tooling is recommended before using V.E.S.P.A. pads.
Important Cautions
- Do not use over uneven slabs, height transitions, or unprepared control joints
- Remove all nails, screws, anchors, or metal objects before use
- Fill deep cracks, gouges, or holes prior to polishing
- Inspect slab thoroughly before operation
Wet Use -Recommended
- Keep surface fully saturated during use
- Avoid light misting only, as slurry may harden into paste and reduce effectiveness
- Clean pads thoroughly after each use
Dry Use
- Use with burnishing machines equipped with active dust extraction
- Lower grits may generate significant dust
- Suitable equipment includes propane or electric high-speed burnishers
Reviews
There are no reviews yet.