Key Features
Clamp Storage That Scales The modular arm-and-backer setup lets you organize mixed clamp types in one system instead of piling them in corners or on a shelf. Steel Shop Build Laser-cut 13-gauge steel with a powder coat finish is built for the constant loading and unloading that clamp racks see in a busy woodworking shop. Woodpeckers CRIS-32 Base Set This 32 inch base set includes a larger backer plate plus both large and small arm sets, giving the Woodpeckers clamp rack system a strong starting point for heavier and lighter clamps.
Overview
The Woodpeckers CRIS-32 Clamp Rack-It System – 32″ Base Set is a wall-mounted clamp storage system for organizing woodworking clamps in less space while keeping them easy to reach. This is a clamp storage organizer designed for clamp organization in a woodworking shop. Model Number CRIS-32. If you have parallel clamps, pipe clamps, F-style clamps, and quick-action clamps fighting for room, this system is built to get them up off the bench and onto the wall where you can actually grab the one you need.
What makes this system work is the modular layout. Woodpeckers uses two arm sizes that bolt to the backer plate at a wide range of spacings, so you can set the rack up around the clamp bars you already own instead of trying to force every clamp into one fixed pattern. Large arms are intended for heavier clamps like parallel jaw and 3/4 inch pipe clamps, while small arms are better for lighter-duty clamps like F-style and quick-action models. That matters because clamp storage is only useful if it matches the way your actual clamp collection is built.
The 32 inch backer plate gives you more room to spread out your layout than a small single-rack solution. According to the product information, the 24 inch and 32 inch backer plates are compatible with either 16 inch or 24 inch stud spacing, which gives you more flexibility when planning a wall storage run in the shop. If you need more capacity later, the backer plates are designed to butt end-to-end, share lag bolts, and sit flush together. In plain terms, you can start with one rack and expand without creating a crooked patchwork on the wall.
Build quality is the right kind of overkill for shop storage. The backer plates and arms are laser cut from 13-gauge steel, formed on CNC equipment, and finished with a durable powder coat. That combination matters because clamp racks get hit, scraped, and loaded with awkward weight over and over again. A light-gauge rack may look fine empty, but it starts to show its weaknesses once you hang a real set of heavy clamps on it. The steel construction here is the reason this system makes sense for a serious woodworking setup rather than just light garage storage.
The included bundle is also practical. This base set comes with the 32 inch backer plate, three pairs of large arms, and two pairs of small arms, which gives you a mixed starting configuration right out of the box. That is useful if your clamp wall includes both heavier parallel or pipe clamps and lighter assembly clamps. Instead of buying separate organizers and hoping they work together, you are starting with one coordinated system.
Installation is straightforward, but it is not a slap-it-anywhere organizer. The product data states that the backer plates must be attached directly to studs. That is the right call for the load these racks are meant to carry, especially once you start hanging multiple heavy clamps. For a woodworking clamp rack, direct stud mounting is not a hassle, it is the feature that keeps the whole setup trustworthy.
The Woodpeckers CRIS-32 Clamp Rack-It System – 32″ Base Set makes the most sense for woodworkers, cabinet shops, furniture builders, and serious DIY shop owners who already own enough clamps to need a real storage plan. If your clamps are scattered on shelves, under benches, or leaning in a corner, this system solves the access problem and the space problem at the same time. It is not about fancy storage for the sake of it. It is about getting clamps organized so glue-up prep is faster and the right clamp is always visible.
Organize Heavy and Light Clamps in One Wall System
This setup is built around the reality that most shops use more than one type of clamp. The CRIS-32 system lets you mix arm sizes so heavier clamps and lighter clamps can live on the same organized wall without wasting space.
- Uses large arms for heavier clamps such as parallel jaw and 3/4 inch pipe clamps
- Uses small arms for lighter-duty clamps such as F-style and quick-action clamps
- Modular spacing helps match the rack to the clamp bars you already own
Built to Mount Right and Expand Later
A clamp rack only works if you trust it loaded. This one is made for direct stud mounting, and the backer plate design makes it easy to keep building out your clamp wall as your collection grows.
- 32 inch backer plate is compatible with 16 inch or 24 inch stud spacing
- Backer plates can butt end-to-end, fit flush, and share lag bolts
- Laser-cut 13-gauge steel and powder coat finish are built for repeated use
What’s in the Box
- (1) 32 inch backer plate
- (3) pairs of large arms
- (2) pairs of small arms
Key Specifications
| Product Type | Clamp storage organizer |
|---|---|
| Model Number | CRIS-32 |
| Base Length | 32 in |
| Weight (lbs) | 26.6 lbs |
| Material | 13-gauge steel |
| Finish | Powder coat |
| Large Arm Sets Included | 3 pairs |
| Small Arm Sets Included | 2 pairs |
Compatibility
Stud Spacing The 32 inch backer plate is compatible with either 16 inch or 24 inch stud spacing. Clamp Types Large arms are intended for heavier clamps like parallel jaw and 3/4 inch pipe clamps, while small arms fit lighter-duty F-style and quick-action clamps. System Expansion Backer plates are designed to butt end-to-end, fit flush, and share lag bolts when you add more sections.
Built For
Woodworking Cabinet Shops Furniture Building Shop Organization Glue-Ups Clamp Storage DIY / Hobbyist Professional Workshops
Pro Tip
Before you bolt the arms down, sort your clamps by bar size and weight first. On the CRIS-32, use the large arms for your heaviest clamps and fine-tune the arm spacing around the bars you reach for most so your everyday clamps are the easiest to grab.
Tool Nut’s Take
Tool Nut’s Take
Woodpeckers CRIS-32 Clamp Rack-It System – 32″ Base Set is the kind of shop upgrade you appreciate every single glue-up
If you own enough clamps to make a mess, this system is a smart fix because it stores serious weight on the wall and still lets you build the layout around the clamps you actually use.
- Who it’s for: Woodworkers, cabinetmakers, furniture builders, and organized DIYers who want a real clamp storage solution instead of a pile in the corner.
- Why it stands out: The modular arm setup, 32 inch base, stud-spacing flexibility, and 13-gauge steel construction make it more than a basic hanger rack.
- Worth knowing: This needs to be mounted directly to studs, which is exactly what you want for a rack meant to hold heavy clamps, but it does mean planning the install properly.
Common Questions
- What is the Woodpeckers CRIS-32 Clamp Rack-It System – 32″ Base Set designed to store? It is designed to organize woodworking clamps, with large arms for heavier clamps such as parallel jaw and 3/4 inch pipe clamps and small arms for lighter-duty F-style and quick-action clamps.
- Does the 32 inch backer plate work with standard stud spacing? Yes. The product data states the 32 inch backer plate is compatible with either 16 inch or 24 inch stud spacing.
- Can this clamp rack system be expanded later? Yes. The backer plates are designed to butt end-to-end, fit flush, and share lag bolts when adding more sections.
- What is the rack made from? The backer plates and arms are laser cut from 13-gauge steel and finished with a durable powder coat.
Reviews
There are no reviews yet.