FRC (Fire Research Corp.), WLA280-A00, LED Tank Display, Maxvision, Large Remote
Features:
- Programmable LEDs for multiple brightness levels and display modes: including the typical four colors for each 1/4 tank increment, or the exclusive MAX VIEW color combinations
- Display shows tank volume level in fractional 1/8 increments
- 96 RGB LEDs
- Built-in LED drivers for seamless, quick installation
- Photo sensor automatically adjusts brightness for daytime/nighttime viewing
- Fourteen 14-3/8″ H x 1-7/8″ W x 7/8″ D Waterproof LED display
The MaxVision works as a remote display, and shows the same color pattern as the primary display. A signal from the primary display module is output on a two-wire datalink and input to the LED light to show the volume of liquid in the tank. The lights can be programmed on the primary display to show full, 3/4, 1/2 and 1/4 tank levels with multiple color patterns on the MaxVision remote display.
Technical Details
| Display Module | |
| Supply Voltage | 9 – 30 VDC |
| Supply Current | 0.25 Amp Maximum |
| Dimensions | 4-3/8 by 3 Inches |
| Housing | Waterproof Polycarbonate with plastic lens and enclosure to protect electronics |
| Indicators | Tri-Color of Bright LEDs (9/10 Rows) |
| Viewing Angle | 180° |
| Cab Miniature Display | |
| Supply Voltage | 9 – 30 VDC |
| Supply Current | 0.5 Amp Maximum |
| Dimensions | 2-1/4 by 1-1/2 Inches |
| MaxVision LED Tank Display | |
| Supply Voltage | 12/24 VDC |
| Supply Current | 1 Amp Maximum at 12 VDC |
| Dimensions | 14-3/8 by 1-7/8 Inches |
| Indicators | 96 Super Bright LEDs |
| Remote Light Driver | |
| Supply Voltage | 9 – 30 VDC |
| Supply Current | 0.1 Amp Maximum |
| Switch | Solid State |
| Switching Voltage | 9 – 30 VDC |
| Switching Current | 20 AMPS Maximum at 12 VDC / 10 AMPS Maximum at 24 VDC |
| Pressure Sensor | |
| Housing | Stainless Steel with 1/4-18 NPT for Mounting |
| Sensor | Ceramic Diaphragm |
| Pressure Range | 0 – 5 PSI (Maximum Tank Height – 10 Feet) |
| Excitation Voltage | 5 VDC |
| Pressure/Vacuum Foam Tank Vent | |
| Material | PVC and Aluminum with Delrin Valves |
| Relief Pressure | ±0.01 PSI |
| Maximum Flow Rate | Compensates 100% for Concentrate Flow Rates / Below 60 GPM |
Reviews
There are no reviews yet.