Key Features
Smaller Pocket Holes This micro-pocket drill bit and guide are made for the smallest Kreg pocket-hole joints. That matters when you are working on narrow parts, trim-sized pieces, cabinet frames, doors, drawers, and other detail work where a standard pocket hole is overkill. Foreman Only Fit The Kreg Tool DB210-MBB Foreman Micro-Pocket Drill Bit With Drill Guide is built for exclusive use with the Foreman Pocket-Hole Machine. If you already run a Foreman and need micro-pocket capability, this is the correct setup. One-Piece Steel Build The one-piece industrial high-speed steel construction is built for repeated shop use and smooth drilling. You get fast, easy drill strokes without piecing together separate components that do not belong together.
Overview
Kreg Tool DB210-MBB Foreman Micro-Pocket Drill Bit With Drill Guide is a dedicated accessory for Kreg pocket-hole joinery users who want smaller, cleaner pocket-hole joints for lighter-duty woodworking and narrow stock. This is a pocket-hole drill bit with drill guide designed for creating Micro-Pocket joinery on the Kreg Foreman Pocket-Hole Machine. Model Number: DB210-MBB.
The big reason to buy this setup is simple: standard pocket holes can be too large for thinner material and smaller parts. This bit and guide are made for 1/2 inch thick material and for narrow stock down to 1 inch wide, which makes them a practical choice for cabinet face frames, small doors, drawers, trim details, and other parts where a smaller joint leaves a cleaner result and gives you more working room.
Kreg specs this accessory with a 19/64 inch drill bit diameter and a 0.170 inch pilot tip. In real use, that means the cut is sized specifically for Micro-Pocket joinery rather than being a repurposed standard bit. If you are building finer assemblies, the smaller profile helps keep the joint proportional to the workpiece instead of overpowering it.
The one-piece industrial high-speed steel construction matters because this is the part doing the cutting every time you cycle the machine. High-speed steel is a solid fit for repeat drilling in wood applications, and the one-piece design keeps the bit and guide working as a matched setup intended for the machine. Kreg also calls out fast, easy drill strokes, which is exactly what you want on a shop machine built around repeatable production work.
This is not a general-purpose drill bit and it is not meant to bounce between different jigs. The Kreg Tool DB210-MBB Foreman Micro-Pocket Drill Bit With Drill Guide is for exclusive use with the Foreman Pocket-Hole Machine, item DB210. That product-specific fit is important because buyers looking for a replacement or upgrade need to know this is tied to the Foreman platform.
If you build cabinet frames, drawer boxes, small project parts, or detailed wood assemblies on a Foreman, this accessory makes a lot of sense. If you do not own the Foreman Pocket-Hole Machine, this is the wrong bit to buy. For the right user, though, it is the straightforward way to add Micro-Pocket capability without guessing on fit or drilling geometry.
Built for Smaller Joinery Work
This setup is meant for woodworkers who need the smallest joint possible on a Foreman machine. It is especially useful when standard pocket-hole hardware would be oversized for the part you are building.
- Designed for 1/2 inch thick material
- Works on narrow stock down to 1 inch wide
- Includes both the micro-pocket drill bit and matching drill guide
What’s in the Box
- (1) Foreman Micro-Pocket Drill Bit with Drill Guide
Foreman Pocket-Hole Machine sold separately.
Key Specifications
| Bit Material | Industrial high-speed steel |
|---|---|
| Bit Diameter | 19/64 in. (7 mm) |
| Pilot Tip Diameter | 0.170 in. (4 mm) |
| Shank Diameter | 1/4 in. |
| Recommended Material Thickness | 1/2 in. (12 mm) |
| Minimum Stock Width | 1 in. (25 mm) |
| Compatible Machine | Kreg Foreman Pocket-Hole Machine DB210 |
| Piece Count | 1 |
Compatibility
Machine Compatibility For exclusive use with the Kreg Foreman Pocket-Hole Machine, item DB210. Joinery Type Designed specifically for Kreg Micro-Pocket joinery applications rather than standard pocket-hole drilling.
Built For
Cabinet Frames Doors Drawers Woodworking Cabinetmaking Small Project Joinery Narrow Stock 1/2 in. Material
Pro Tip
Buy this only if you are setting up a Foreman for Micro-Pocket work. If your projects are mostly face frames, drawers, and other small parts in 1/2 inch stock, this is the accessory that keeps the joint size in proportion to the workpiece.
Warranty & Support
1-year warranty.
Tool Nut’s Take
Tool Nut’s Take
Kreg Tool DB210-MBB Foreman Micro-Pocket Drill Bit With Drill Guide for Cleaner Small-Part Joinery
This is the right buy for Foreman owners who need smaller pocket holes for lighter, narrower woodworking parts and do not want to improvise with the wrong bit.
- Who it’s for: Foreman Pocket-Hole Machine users building cabinet frames, doors, drawers, and other detailed woodworking projects in thinner or narrower stock.
- Why it stands out: It is purpose-built for Micro-Pocket joinery, sized for 1/2 inch material and 1 inch wide stock, and made from one-piece industrial high-speed steel.
- Worth knowing: This is a dedicated Foreman accessory, not a universal pocket-hole bit. If you do not have the DB210 machine, keep shopping.
Common Questions
- What machine does this fit? It is for exclusive use with the Kreg Foreman Pocket-Hole Machine, item DB210.
- What material thickness is it designed for? It is intended for 1/2 inch (12 mm) thick material.
- Can it handle narrow parts? Yes. Kreg states it is good for narrow stock down to 1 inch (25 mm) wide.
- What is the drill bit diameter? The bit diameter is 19/64 inch (7 mm), with a 0.170 inch (4 mm) pilot tip.
Reviews
There are no reviews yet.